Hi I just noticed that this series need to be reworked as some update has been merged on mainline since this series has been submitted on mailing list.
A v10 will be pushed today. Sorry Patrice On 09/04/2017 06:03 PM, Patrice CHOTARD wrote: > Hi > > Just a gentle reminder to not forget this series > > Thanks > > On 07/18/2017 02:31 PM, patrice.chot...@st.com wrote: >> From: Patrice Chotard <patrice.chot...@st.com> >> >> This series adds : >> _ update existing sdhci driver to use reset framework >> _ add usb phy driver >> _ add fastboot support >> >> With all this feature enable, it's now possible to >> _ boot on usb mass storage device >> _ boot from kernel image and dtb previously loaded using tftp >> _ update mmc partiton using fastboot >> >> v9: _ update doc/device-tree-bindings/phy/phy-stih407-usb.txt requested by >> Marek Vasut in patch 4 >> _ move inclusion of linux/usb/otg.h from include/dwc3-sti-glue.h to >> drivers/usb/host/dwc3-sti-glue.c >> requested by Marek Vasut in patch 7 >> >> v8: _ update failpath label names in path 7 requested by Marek Vasut >> >> v7: _ rebase on top of dm/master to use last livetree update >> _ replace fdtdec_parse_phandle_with_args() by >> dev_read_phandle_with_args() in patch 4 >> _ replace uclass_get_device_by_of_offset() by >> uclass_get_device_by_ofnode() in patch 4 >> >> v6: _ generic ehci/ohci drivers extension has been send separately >> _ add reviewed-by Simon Glass >> >> v5: _ extend generic ehci with phy >> _ extend generic ohci with clock, reset and phy >> _ remove specifi STi ehci and ohci drivers and use generic ohci/ehci >> ones >> _ update stih410-b2260 device tree to use ehci and ohci generic >> drivers >> >> v4: _ use PHY uclass currently available on dm-next branch, >> update sti ehci, ohci and xhci drivers to use new PHY uclass. >> >> v3: _ remove reset driver (already applied on u-boot-dm tree by Simon >> Glass) >> _ patch 4: add new USB PHY uclass requested by Simon Glass >> _ patch 5: convert STi usb phy driver to new USB PHY uclass >> _ patch 6/7: update echi/ohci drivers to use USB PHY uclass >> _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti >> driver binded >> dwc3-sti (STi glue driver) which was not correct. Now we respect the >> device >> tree hierarchy, ie the STi dwc3 glue driver is first probed, then >> bind the >> xhci-sti driver. >> >> v2: _ add Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com> in patches >> 2,3 and 4 >> _ fix remarks done by Marek Vasut : >> _ patch 5 : replace bitfield_replace() by clrsetbits_le32() >> _ patch 6 : update error messages and add remove callback >> _ patch 8 : put board specific defines in a separate patch >> _ patch 7: use setbits_le32() instead of read, modify, write >> sequence and add missing parenthesis >> _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21 >> in patch 14 >> >> >> >> Patrice Chotard (8): >> Patrice Chotard (10): >> mmc: sti_sdhci: Rework sti_mmc_core_config() >> ARM: dts: stih410-family: Add missing reset_names for mmc1 node >> mmc: sti_sdhci: Use reset framework >> usb: phy: Add STi USB2 PHY >> STiH410-B2260: enable USB Host Networking >> STiH410-B2260: enable USB, fastboot, reset, PHY related flags >> usb: dwc3: Add dwc3 glue driver support for STi >> ARM: dts: STiH410: set DWC3 dual role mode to peripheral >> ARM: dts: STiH410: update ehci and ohci compatible >> board: STiH410-B2260: add fastboot support >> >> arch/arm/dts/stih407-family.dtsi | 3 +- >> arch/arm/dts/stih410.dtsi | 11 +- >> arch/arm/include/asm/arch-stih410/sys_proto.h | 11 + >> board/st/stih410-b2260/board.c | 42 ++++ >> configs/stih410-b2260_defconfig | 39 +++- >> doc/device-tree-bindings/phy/phy-stih407-usb.txt | 24 +++ >> doc/device-tree-bindings/usb/dwc3-st.txt | 60 ++++++ >> drivers/mmc/sti_sdhci.c | 62 +++--- >> drivers/phy/Kconfig | 8 + >> drivers/phy/Makefile | 1 + >> drivers/phy/sti_usb_phy.c | 181 ++++++++++++++++ >> drivers/usb/host/Kconfig | 9 + >> drivers/usb/host/Makefile | 1 + >> drivers/usb/host/dwc3-sti-glue.c | 257 >> +++++++++++++++++++++++ >> include/configs/stih410-b2260.h | 16 ++ >> include/dwc3-sti-glue.h | 41 ++++ >> 16 files changed, 730 insertions(+), 36 deletions(-) >> create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h >> create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt >> create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt >> create mode 100644 drivers/phy/sti_usb_phy.c >> create mode 100644 drivers/usb/host/dwc3-sti-glue.c >> create mode 100644 include/dwc3-sti-glue.h >> > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
