Hi Stefan,
On 29/08/2017 18:10, Stefan Agner wrote:
> From: Stefan Agner <stefan.ag...@toradex.com>
>
> The NXP i.MX 6UL and 6ULL do not support SATA and have no SATA
> boot mode, hence remove it from the boot device detecion. This
> fixes a build error introduced with 3bd1642d4d50 ("imx: fix USB
> boot mode detection for i.MX 6UL and 6ULL")
>
> Fixes: 3bd1642d4d50 ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL")
> Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
> ---
>
> arch/arm/mach-imx/spl.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
> index bcd1033fdb..3853e7739d 100644
> --- a/arch/arm/mach-imx/spl.c
> +++ b/arch/arm/mach-imx/spl.c
> @@ -45,8 +45,10 @@ u32 spl_boot_device(void)
> case IMX6_BMODE_RESERVED:
> return BOOT_DEVICE_BOARD;
> /* SATA: See 8.5.4, Table 8-20 */
> +#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL)
> case IMX6_BMODE_SATA:
> return BOOT_DEVICE_SATA;
> +#endif
> /* Serial ROM: See 8.5.5.1, Table 8-22 */
> case IMX6_BMODE_SERIAL_ROM:
> /* BOOT_CFG4[2:0] */
>
Reviewed-by: Stefano Babic <sba...@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
