On Fri, Aug 25, 2017 at 10:46:55AM +0100, Paul Barker wrote: > On Fri, Aug 25, 2017 at 2:46 AM, Simon Glass <s...@chromium.org> wrote: > > Hi, > > > > On 20 August 2017 at 20:59, Simon Glass <s...@chromium.org> wrote: > >> Hi Paul, > >> > >> On 3 August 2017 at 11:42, Tom Rini <tr...@konsulko.com> wrote: > >>> On Thu, Aug 03, 2017 at 09:42:13AM -0600, Stephen Warren wrote: > >>>> On 08/03/2017 07:45 AM, Simon Glass wrote: > >>>> ... > >>>> >I'm not sure if we have a Raspberry Pi in a test farm anywhere. I > >>>> >should be able to look next week if no one can figure these out > >>>> >beforehand. > >>>> > >>>> I thought that Tom had some Pis in his test farm? > >>> > >>> I have an RPi 3, but we don't have Linux boot tests atm. I'm talking > >>> with Kevin Hilman about how I might setup kernelci to test a few things > >>> in my lab, which might catch this kind of problem sooner rather than > >>> later. > >> > >> Just a note that I can repeat the CONFIG_OF_EMBED problem. I am not > >> sure what is going on or why this would prevent the kernel booting. > >> But I believe rpi has a device tree pass-through from the pre-U-Boot > >> boot loader, and I am booting with that, so perhaps it relies on > >> CONFIG_OF_EMBED in some way? > > > > I can see some code in board_fdt_blob_setup() but it does not seem to > > be enabled. For me I am able to boot Linux without CONFIG_OF_EMBED. > > > >> > >> I can also repeat the USB keyboard problem. It doesn't detect the > >> keyboard at all. For me this can be fixed by enabling > >> CONFIG_DM_KEYBOARD, so we should probably do that for all rpi boards. > > > > I have sent a patch for this. > > This patch looks good. I've now got working keyboard and network in > u-boot along with a successful boot of Linux for the 2 devices I've > tested (Original rpi and rpi3 32-bit) from the following: > > * U-boot 2017.07 release > * Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED" (25877d4e) > * Apply backported version of your patch > > The rpi firmware does provide a device tree blob at boot and my only > guess is that this is currently being overwritten or ignored. That's > masked when CONFIG_OF_EMBED is enabled as we use an embedded device > tree instead of the one provided by the rpi firmware. > > For u-boot v2017.09 release is it possible to re-enable > CONFIG_OF_EMBED until we can find and fix the underlying issue? Or is > there some reason to avoid CONFIG_OF_EMBED?
There is also CONFIG_OF_BOARD that is supposed to do something similiar but adding that to rpi_3_defconfig resulted in nothing on serial and a coloured splash screen from the gpu firmware on hdmi. The only way to use the device trees that come with the firmware seems to be adding CONFIG_OF_EMBED. Without it the dtb header is missing from where fdt_addr_r points to (0x100), libfdt rightfully complains and anything expecting a device tree breaks. U-Boot> boot switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi 78271 bytes read in 27 ms (2.8 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC ## Starting EFI application at 01000000 ... Scanning disk sd...@7e300000.blk... Scanning disk usb_mass_storage.lun0... Found 2 disks >> OpenBSD/arm64 BOOTAA64 0.8 boot> boot -a cannot open sd0a:/etc/random.seed: No such file or directory booting sd0a:/bsd: 3804004+574452+508392+674936 [283297+96+448008+238164]=0x80df08 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot