On 08/18/2017 01:36 AM, Madalin Bucur wrote: > The old logic always enabled the TX-delay when the phy-mode was set to > PHY_INTERFACE_MODE_RGMII. With this patch we enable the TX delay for > PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID and > disable it for PHY_INTERFACE_MODE_RGMII. > > Based on a similar change made in the Linux Realtek PHY driver > by Martin Blumenstingl <martin.blumensti...@googlemail.com>. > > Signed-off-by: Madalin Bucur <madalin.bu...@nxp.com> > ---
Together with https://patchwork.ozlabs.org/patch/797657/, this fixes the network issue on LS1043ARDB. Acked-by: York Sun <york....@nxp.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
