> -----Original Message----- > From: Prabhakar Kushwaha > Sent: Friday, August 18, 2017 3:52 PM > To: Santan Kumar <santan.ku...@nxp.com>; u-boot@lists.denx.de; York > Sun <york....@nxp.com> > Cc: Priyanka Jain <priyanka.j...@nxp.com> > Subject: RE: [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type > from n25q512a to s25fs512s > > > > -----Original Message----- > > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Santan > > Kumar > > Sent: Friday, August 18, 2017 3:21 PM > > To: u-boot@lists.denx.de; York Sun <york....@nxp.com> > > Cc: Priyanka Jain <priyanka.j...@nxp.com> > > Subject: [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type > > from n25q512a to s25fs512s > > > > As per updated board design, different QSPI flash is connected on > > boards, hence change QSPI flash type from Micron n25q512a device to > > spansion s25fs512s device in dts and config. > > How backward compatibility with older boards being managed? > > > --prabhakar >>[Santan] All older board are using Spansion flash. Initially Micron flash was >>planned to place in LS2081ARDB board but at last moment flash was changed.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
