USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature
Optimal eye at TXREFTUNE value to 1001 is observed, change set the same value. Signed-off-by: Ran Wang <ran.wan...@nxp.com> --- Change in v2: In function erratum_a009008(): 1.Put a blank line after variable declaration. 2.Move common code together. arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 ++++++++++++++++++++++ .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 +++++ .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 + 4 files changed, 40 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 5825f9b..300f5ce 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -22,6 +22,7 @@ config ARCH_LS1043A select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_ERRATUM_A010539 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_HAS_DDR3 select SYS_FSL_HAS_DDR4 select ARCH_EARLY_INIT_R @@ -43,6 +44,7 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010165 select SYS_FSL_ERRATUM_A010539 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_HAS_DDR4 select SYS_FSL_SRDS_2 select ARCH_EARLY_INIT_R @@ -79,6 +81,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010165 select SYS_FSL_ERRATUM_A009203 + select SYS_FSL_ERRATUM_A009008 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F @@ -222,6 +225,10 @@ config SYS_FSL_ERRATUM_A010315 config SYS_FSL_ERRATUM_A010539 bool "Workaround for PIN MUX erratum A010539" +config SYS_FSL_ERRATUM_A009008 + bool "Workaround for USB PHY erratum A009008" + + config MAX_CPUS int "Maximum number of CPUs permitted for Layerscape" default 4 if ARCH_LS1043A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index aee1ffa..261b2dd 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -52,6 +52,30 @@ bool soc_has_aiop(void) return false; } +static void erratum_a009008(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009008 + u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) + u32 val = scfg_in32(scfg + SCFG_USB3PRM1CR_USB1 / 4); + + val &= ~(0xF << 6); + scfg_out32(scfg + SCFG_USB3PRM1CR_USB1 / 4, val|(USB_TXVREFTUNE << 6)); + val = scfg_in32(scfg + SCFG_USB3PRM1CR_USB2 / 4); + val &= ~(0xF << 6); + scfg_out32(scfg + SCFG_USB3PRM1CR_USB2 / 4, val|(USB_TXVREFTUNE << 6)); + val = scfg_in32(scfg + SCFG_USB3PRM1CR_USB3 / 4); + val &= ~(0xF << 6); + scfg_out32(scfg + SCFG_USB3PRM1CR_USB3 / 4, val|(USB_TXVREFTUNE << 6)); +#elif defined(CONFIG_ARCH_LS2080A) + u32 val = scfg_in32(scfg + SCFG_USB3PRM1CR / 4); + + val &= ~(0xF << 6); + scfg_out32(scfg + SCFG_USB3PRM1CR / 4, val|(USB_TXVREFTUNE << 6)); +#endif +#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */ +} + #if defined(CONFIG_FSL_LSCH3) /* * This erratum requires setting a value to eddrtqcr1 to @@ -198,6 +222,7 @@ void fsl_lsch3_early_init_f(void) #endif erratum_a008514(); erratum_a008336(); + erratum_a009008(); #ifdef CONFIG_CHAIN_OF_TRUST /* In case of Secure Boot, the IBR configures the SMMU * to allow only Secure transactions. @@ -473,6 +498,7 @@ void fsl_lsch2_early_init_f(void) erratum_a009929(); erratum_a009660(); erratum_a010539(); + erratum_a009008(); } #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 8ad199f..62d7046 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -337,6 +337,12 @@ struct ccsr_gur { #define SCFG_USBPWRFAULT_USB2_SHIFT 2 #define SCFG_USBPWRFAULT_USB1_SHIFT 0 +#define SCFG_BASE 0x01570000 +#define SCFG_USB3PRM1CR_USB1 0x070 +#define SCFG_USB3PRM1CR_USB2 0x07C +#define SCFG_USB3PRM1CR_USB3 0x088 +#define USB_TXVREFTUNE 0x9 + #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 #define SCFG_SNPCNFGCR_SATARDSNP 0x00800000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 59410aa..c622ee5 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -133,6 +133,7 @@ #define SCFG_BASE 0x01fc0000 #define SCFG_USB3PRM1CR 0x000 #define SCFG_USB3PRM1CR_INIT 0x27672b2a +#define USB_TXVREFTUNE 0x9 #define SCFG_QSPICLKCTLR 0x10 #define TP_ITYP_AV 0x00000001 /* Initiator available */ -- 2.1.0.27.g96db324 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot