Hi Vikas, On Sun, May 28, 2017 at 2:55 PM, Vikas Manocha <vikas.mano...@st.com> wrote: > This commit supports booting from stm32 internal nor flash. spl U-Boot > initializes the sdram memory, copies next image (e.g. standard U-Boot) > to sdram & then jumps to entry point. > > Here are the flash memory addresses for U-Boot-spl & standard U-Boot: > - spl U-Boot : 0x0800_0000 > - standard U-Boot : 0x0800_8000
Is there another patchset missing on mainline for booting via spl? on mainline with the stm32f746-disco board: U-Boot SPL 2017.09-rc1-00177-gd529124fdc (Aug 10 2017 - 12:33:35) Trying to boot from XIP Hard fault pc : 08008008 lr : 08000adb xPSR : 21000000 r12 : 2004f338 r3 : 00000005 r2 : 081c0000 r1 : ffffff9a r0 : 00000000 Resetting CPU ... resetting ... I'm using openocd to program openocd -f board/stm32f7discovery.cfg \ -c "init" \ -c "reset init" \ -c "flash probe 0" \ -c "flash write_image erase ./spl/u-boot-spl.bin 0x08000000" \ -c "flash write_image erase ./u-boot.img 0x08008000" \ -c "reset run" \ -c "shutdown" Regards, -- Robert Nelson https://rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
