Thanks for you answer. How could I do a port to that board? regards,
2009/12/1 Detlev Zundel <d...@denx.de>: > Hi Frédéric, > >> I got a KAMIO-1251 board equipped with a MIPS AU1250 CPU. I would >> like to build U-BOOT for that board, is it possible? > > It is possible, but in mainline U-Boot the board is not (yet) > supported. So in order to build U-Boot you would need to do a port to > the board first.... > > Also it seems like this would be the first U-Boot port to the au1250, as > I only see au1000,au1100,au1500 and au1550 boards in U-Boot (check > MAKEALL in the top directory). > > Best wishes > Detlev > > -- > In short: much of our country's [USA] counterterrorism security spending is > not designed to protect us from the terrorists, but instead to protect our > public officials from criticism when another attack occurs. > -- Bruce Schneier > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
