Hi Philipp: 2017-07-29 3:22 GMT+08:00 Philipp Tomsich < philipp.toms...@theobroma-systems.com>:
> With SPL and TPL support for the RK3368 in place, mark SPL and TPL as > supported from Kconfig for the RK3368. As this is primarily tested on > the RK3368-uQ7, we'll leave it to board's individual defconfig to > enable. > > Also enable DEBUG_UART_BOARD_INIT for the RK3368, so we get output > during the early boot-up, as we turn on TPL and SPL. > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > > Reviewed-by: Simon Glass <s...@chromium.org> > --- > > Changes in v3: None > Changes in v2: None > > arch/arm/mach-rockchip/Kconfig | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/ > Kconfig > index 8a89b51..8406e33 100644 > --- a/arch/arm/mach-rockchip/Kconfig > +++ b/arch/arm/mach-rockchip/Kconfig > @@ -67,6 +67,13 @@ config ROCKCHIP_RK3328 > config ROCKCHIP_RK3368 > bool "Support Rockchip RK3368" > select ARM64 > + select SUPPORT_SPL > + select SUPPORT_TPL > + select SPL_SEPARATE_BSS > + select SPL_SERIAL_SUPPORT > + select TPL_SERIAL_SUPPORT > These should depends on TPL/SPL, or we will get compile warnings like bellow on non-SPL/TPL boards(px5 evb): (ROCKCHIP_RK3368 && ROCKCHIP_RK3399 && X86_RUN_64BIT) selects SPL_SEPARATE_BSS which has unmet direct dependencies (SPL) + select ENABLE_ARM_SOC_BOOT0_HOOK > + select DEBUG_UART_BOARD_INIT > select SYS_NS16550 > help > The Rockchip RK3368 is a ARM-based SoC with a octa-core > (organised > -- > 2.1.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
