Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and
have started to use the TPL-variant for the RK3368, it's time to clean
up behind ourselves: move both variants into Kconfig and remove them
from the whitelist.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v3:
- moves SPL_LDSCRIPT and TPL_LDSCRIPT into Kconfig, as requested by
by Tom; this gets rid of the whitelist-entry for SPL_LDSCRIPT (which
qualifies as a preexisting condition) and of the newly created one
for TPL_LDSCRIPT
Changes in v2: None
common/spl/Kconfig | 18 ++++++++++++++++++
scripts/Makefile.spl | 9 ++++++++-
scripts/config_whitelist.txt | 2 --
3 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 64f9e1f..b01d4f1 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -18,6 +18,15 @@ config SPL
if SPL
+config SPL_LDSCRIPT
+ string "Linker script for the SPL stage"
+ depends on SPL
+ help
+ The SPL stage will usually require a different linker-script
+ (as it runs from a different memory region) than the regular
+ U-Boot stage. Set this to the path of the linker-script to
+ be used for SPL.
+
config SPL_BOARD_INIT
bool "Call board-specific initialization in SPL"
help
@@ -707,6 +716,15 @@ config TPL
if TPL
+config TPL_LDSCRIPT
+ string "Linker script for the TPL stage"
+ depends on TPL
+ help
+ The TPL stage will usually require a different linker-script
+ (as it runs from a different memory region) than the regular
+ U-Boot stage. Set this to the path of the linker-script to
+ be used for TPL.
+
config TPL_BOOTROM_SUPPORT
bool "Support returning to the BOOTROM (from TPL)"
help
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 4a9a58f..167b2d9 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -103,9 +103,16 @@ u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
endif
# Linker Script
-ifdef CONFIG_$(SPL_TPL_)LDSCRIPT
+# First test whether there's a linker-script for the specific stage defined...
+ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
+else
+# ...then fall back to the generic SPL linker-script
+ifneq ($(CONFIG_SPL_LDSCRIPT),)
+# need to strip off double quotes
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
+endif
endif
ifeq ($(wildcard $(LDSCRIPT)),)
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ee3fcd0..0e09a52 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2252,7 +2252,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
CONFIG_SPL_INIT_MINIMAL
CONFIG_SPL_JR0_LIODN_NS
CONFIG_SPL_JR0_LIODN_S
-CONFIG_SPL_LDSCRIPT
CONFIG_SPL_LOAD_FIT_ADDRESS
CONFIG_SPL_MAX_FOOTPRINT
CONFIG_SPL_MAX_PEB_SIZE
@@ -4981,7 +4980,6 @@ CONFIG_TI_KEYSTONE_SERDES
CONFIG_TI_KSNAV
CONFIG_TI_SPI_MMAP
CONFIG_TMU_TIMER
-CONFIG_TPL_LDSCRIPT
CONFIG_TPL_MAX_SIZE
CONFIG_TPL_PAD_TO
CONFIG_TPL_STACK
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
