Hi Philipp,
In order to easily model a that CMD_USB_MASS_STORAGE implies having
USB_FUNCTION_MASS_STORAGE enabled, we first need to migrate
USB_FUNCTION_MASS_STORAGE to Kconfig.
Thanks for the conversion!
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Acked-by: Łukasz Majewski <lu...@denx.de>
---
Changes in v3: None
Changes in v2:
- ran 'tabify' on newly added lines to fix a spaces vs. tabs issues
drivers/usb/gadget/Kconfig | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 261ed12..8d1cd57 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -34,6 +34,15 @@ menuconfig USB_GADGET
peripheral/device side bus controller, and a "gadget driver" for
your peripheral protocol.
+config USB_FUNCTION_MASS_STORAGE
+ bool "USB mass-storage class implementation"
+ help
+ The Mass Storage Function acts as a USB Mass Storage device
+ appearing to the host as a disk drive or as a CD-ROM drive.
+
+ This is required (and implied) by the USB mass-storage emulation
+ command ('ums').
+
if USB_GADGET
config USB_GADGET_ATMEL_USBA
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
