From: Klaus Goger <klaus.go...@theobroma-systems.com>
prefix the bl31 firmware needed to build uboot.itb so it can coexist in
the build area with ATFs from other boards (i.e. lion_rk3368)
Signed-off-by: Klaus Goger <klaus.go...@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v2: None
board/theobroma-systems/puma_rk3399/README | 2 +-
board/theobroma-systems/puma_rk3399/fit_spl_atf.its | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/theobroma-systems/puma_rk3399/README
b/board/theobroma-systems/puma_rk3399/README
index 250e345..214281a 100644
--- a/board/theobroma-systems/puma_rk3399/README
+++ b/board/theobroma-systems/puma_rk3399/README
@@ -37,7 +37,7 @@ Compile the ATF
> cd arm-trusted-firmware
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
- > cp build/rk3399/release/bl31.bin ../u-boot
+ > cp build/rk3399/release/bl31.bin ../u-boot/bl31-rk3399.bin
Compile the M0 firmware
=======================
diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
index 0519fad..520f846 100644
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
+++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
@@ -23,7 +23,7 @@
};
atf {
description = "ARM Trusted Firmware";
- data = /incbin/("../../../bl31.bin");
+ data = /incbin/("../../../bl31-rk3399.bin");
type = "firmware";
arch = "arm64";
compression = "none";
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
