On Sun, 22 Nov 2009 21:57:05 +0100 Wolfgang Denk <w...@denx.de> wrote:
> > In message <20090713131125.6e6a3...@marrow.netinsight.se> Simon Kagstrom > > wrote: > > > The mv881116 PHY initialization is split out to a common file to enable > > > code reuse between different boards. > > > > > > Signed-off-by: Simon Kagstrom <simon.kagst...@netinsight.net> > > > --- > > > board/Marvell/sheevaplug/sheevaplug.c | 32 +-------------- > > > board/Marvell/sheevaplug/sheevaplug.h | 8 ---- > > > drivers/net/phy/Makefile | 1 + > > > drivers/net/phy/mv88e1116.c | 66 > > > +++++++++++++++++++++++++++++++++ > > > include/configs/sheevaplug.h | 1 + > > > include/mv88e1116.h | 29 ++++++++++++++ > > > 6 files changed, 100 insertions(+), 37 deletions(-) > > > create mode 100644 drivers/net/phy/mv88e1116.c > > > create mode 100644 include/mv88e1116.h > > > > Ping... > > Can you please check the status of this patch: > http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/63590/focus=63591 I believe Prafulla voted to keep the PHY stuff locally in sheevaplug.c and openrd_base.c until the generic PHY support was added. So I later submitted a patch with the PHY init for OpenRD base in the board-file (like sheevaplug). So I think this patch should simply be dropped - code reuse will happen in a more generic way later anyway. Perhaps you have some additional comments, Prafulla? // Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
