On Mon, Jul 17, 2017 at 10:03 PM, Stefan Roese <s...@denx.de> wrote: > The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For > correct operation, it needs to get reset upon power-up. Otherwise it > may happen that the hub is not detected after a software reboot. > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Simon Glass <s...@chromium.org> > Cc: Bin Meng <bmeng...@gmail.com> > --- > board/dfi/dfi-bt700/Kconfig | 1 + > board/dfi/dfi-bt700/dfi-bt700.c | 27 +++++++++++++++++++++++++++ > 2 files changed, 28 insertions(+) >
Reviewed-by: Bin Meng <bmeng...@gmail.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
