The core support for NAND booting is there already, so this patch
is pretty straightforward.
There is one trick though: top level Makefile expects nand_spl to
be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code
from mpc8313erdb boards, and so to not duplicate the code we just
symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
MAKEALL | 1 +
Makefile | 11 ++++
board/freescale/mpc8315erdb/config.mk | 6 ++
board/freescale/mpc8315erdb/mpc8315erdb.c | 42 +++++++++++++
board/freescale/mpc8315erdb/sdram.c | 7 ++
include/configs/MPC8315ERDB.h | 90 +++++++++++++++++++++++------
6 files changed, 138 insertions(+), 19 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index d63c5c2..821e3e8 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -360,6 +360,7 @@ LIST_83xx=" \
MPC8313ERDB_33 \
MPC8313ERDB_NAND_66 \
MPC8315ERDB \
+ MPC8315ERDB_NAND \
MPC8323ERDB \
MPC832XEMDS \
MPC832XEMDS_ATM \
diff --git a/Makefile b/Makefile
index bcb3fe9..77e73f1 100644
--- a/Makefile
+++ b/Makefile
@@ -2291,8 +2291,19 @@ MPC8313ERDB_NAND_66_config: unconfig
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
+MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
+ if [ "$(findstring _NAND_,$@)" ] ; then \
+ $(XECHO) -n "...NAND..." ; \
+ echo "TEXT_BASE = 0x00100000" > \
+ $(obj)board/freescale/mpc8315erdb/config.tmp ; \
+ echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
+ ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+ fi ;
@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+ @if [ "$(findstring _NAND_,$@)" ] ; then \
+ echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+ fi ;
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
diff --git a/board/freescale/mpc8315erdb/config.mk
b/board/freescale/mpc8315erdb/config.mk
index f768264..fd72a14 100644
--- a/board/freescale/mpc8315erdb/config.mk
+++ b/board/freescale/mpc8315erdb/config.mk
@@ -1 +1,7 @@
+ifndef NAND_SPL
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+endif
+
+ifndef TEXT_BASE
TEXT_BASE = 0xFE000000
+endif
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c
b/board/freescale/mpc8315erdb/mpc8315erdb.c
index dea4d6f..d5e71dc 100644
--- a/board/freescale/mpc8315erdb/mpc8315erdb.c
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -32,6 +32,8 @@
#include <mpc83xx.h>
#include <netdev.h>
#include <asm/io.h>
+#include <ns16550.h>
+#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -45,6 +47,8 @@ int board_early_init_f(void)
return 0;
}
+#ifndef CONFIG_NAND_SPL
+
static u8 read_board_info(void)
{
u8 val8;
@@ -220,3 +224,41 @@ int board_eth_init(bd_t *bis)
cpu_eth_init(bis); /* Initialize TSECs first */
return pci_eth_init(bis);
}
+
+#else /* CONFIG_NAND_SPL */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8315ERDB\n");
+ return 0;
+}
+
+void board_init_f(ulong bootflag)
+{
+ board_early_init_f();
+ NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+ puts("NAND boot... ");
+ init_timebase();
+ initdram(0);
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (gd->flags & GD_FLG_SILENT)
+ return;
+
+ if (c == '\n')
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
+
+ NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
+}
+
+#endif /* CONFIG_NAND_SPL */
diff --git a/board/freescale/mpc8315erdb/sdram.c
b/board/freescale/mpc8315erdb/sdram.c
index ead7b1e..02c99e9 100644
--- a/board/freescale/mpc8315erdb/sdram.c
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -54,6 +54,7 @@ static void resume_from_sleep(void)
* This is useful for faster booting in configs where the RAM is unlikely
* to be changed, or for things like NAND booting where space is tight.
*/
+#ifndef CONFIG_SYS_RAMBOOT
static long fixed_sdram(void)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
@@ -100,6 +101,12 @@ static long fixed_sdram(void)
return msize;
}
+#else
+static long fixed_sdram(void)
+{
+ return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
phys_size_t initdram(int board_type)
{
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 8eaff5d..c2ee1ee 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -51,20 +51,29 @@
HRCWL_SVCOD_DIV_2 |\
HRCWL_CSB_TO_CLKIN_2X1 |\
HRCWL_CORE_TO_CSB_3X1)
-#define CONFIG_SYS_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH_BASE (\
HRCWH_PCI_HOST |\
HRCWH_PCI1_ARBITER_ENABLE |\
HRCWH_CORE_ENABLE |\
- HRCWH_FROM_0X00000100 |\
HRCWH_BOOTSEQ_DISABLE |\
HRCWH_SW_WATCHDOG_DISABLE |\
- HRCWH_ROM_LOC_LOCAL_16BIT |\
- HRCWH_RL_EXT_LEGACY |\
HRCWH_TSEC1M_IN_RGMII |\
HRCWH_TSEC2M_IN_RGMII |\
HRCWH_BIG_ENDIAN |\
HRCWH_LALE_NORMAL)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_ROM_LOC_NAND_SP_8BIT |\
+ HRCWH_RL_EXT_NAND)
+#else
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY)
+#endif
+
/*
* System IO Config
*/
@@ -79,6 +88,10 @@
*/
#define CONFIG_SYS_IMMR 0xE0000000
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
+#endif
+
/*
* Arbiter Setup
*/
@@ -161,12 +174,6 @@
*/
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon
*/
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
@@ -200,10 +207,10 @@
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at
flash base */
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
-#define CONFIG_SYS_BR0_PRELIM ( CONFIG_SYS_FLASH_BASE /* Flash Base
address */ \
+#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
| (2 << BR_PS_SHIFT) /* 16 bit port size */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR0_PRELIM ( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_NOR_OR_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
| OR_UPM_XAM \
| OR_GPCM_CSNT \
| OR_GPCM_ACS_DIV2 \
@@ -223,19 +230,32 @@
/*
* NAND Flash on the Local Bus
*/
-#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
+
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_NAND_BASE 0xFFF00000
+#else
+#define CONFIG_SYS_NAND_BASE 0xE0600000
+#endif
+
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
+#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */
\
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \
| OR_FCM_CSCT \
| OR_FCM_CST \
| OR_FCM_CHT \
@@ -244,9 +264,31 @@
| OR_FCM_EHTR )
/* 0xFFFF8396 */
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#endif
+
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
+ !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
/*
* Serial Port
*/
@@ -255,7 +297,7 @@
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -409,7 +451,16 @@
/*
* Environment
*/
-#ifndef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_NAND_U_BOOT)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_OFFSET (512 * 1024)
+ #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+ #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+ #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+ #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
+ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_RANGE)
+#elif !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE +
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
@@ -443,7 +494,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_LOADS
#endif
@@ -505,7 +556,8 @@
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 |
BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS |
BATU_VP)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | \
+ BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
