Dear Albert Aribaud,
In message <1258239796-21528-4-git-send-email-albert.arib...@free.fr> you wrote:
> This board is based on the Marvell Orion5x SoC.
> Current support is limited to console and Flash.
> Flash support uses LEGACY as the Macronix 29LV400
> used on ED Mini V2 is not 100% CFI compliant.
And the differences are really so big that we cannot tweak the CFI
driver?
> +int dram_init(void)
> +{
> + int i;
> +
> + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> + gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
> + gd->bd->bi_dram[i].size = orion5x_sdram_bs(i);
> + }
> + return 0;
> +}
Cannot you use get_ram_size() for auto-sizing and checking?
> diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
> new file mode 100644
> index 0000000..31de164
> --- /dev/null
> +++ b/include/configs/edminiv2.h
...
> +#define CONFIG_SYS_BAUDRATE_TABLE \
> +{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
Indentation by a TAB, please.
> +#define CONFIG_SYS_FLASH_SECTSZ \
> +{16384, 8192, 8192, 32768, 65536, 65536, 65536, 65536, 65536, 65536, 65536}
Ditto. And be careful about the line length.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
You get a wonderful view from the point of no return.
- Terry Pratchett, _Making_Money_
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
