<snip linux-omap> On Tue, Nov 17, 2009 at 12:36 AM, Dirk Behme <dirk.be...@googlemail.com> wrote: > Mai Daftedar wrote: >> >> Hi all, >> I was wondering how can we configure the u-boot with the TFTP >> capability on the beagle board at runtime.. > > For this you will need ethernet support in U-Boot. There are two (?) options > to achieve this: Add support for USB ethernet dongle in U-Boot or use a > Beagle expansion card with ethernet. > > Regarding USB ethernet dongle, there are some basic USB patches for Beagle > U-Boot on the list. But I'm not sure how much work it is to enable them to > support USB ethernet. > > For ethernet on expansion board, there is TinCanTool's Zippy board [1]. To > access ethernet on this board from U-Boot, an U-Boot OMAP3 SPI driver is > missing. > > Both options are not ready, yet, and need some development work. Any help is > greatly appreciated!
A third option might be to support RNDIS or CDC usb gadget support and use the usb port with beagle.. tom might be able to comment better. > > Cheers > > Dirk > > Btw.: I added U-Boot list, it is the better place to discuss this. > > [1] > http://www.tincantools.com/product.php?productid=16147&cat=0&page=1&featured > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
