On Tue, Jun 27, 2017 at 8:23 AM, Lothar Waßmann <l...@karo-electronics.de> wrote: > When CONFIG_DM_ETH is set, the FEC ethernet controller is reset after > the PHY has been set up and initialzed. This breaks the communication > with the PHY and results in an inoperable ethernet interface. > > Do the initialization with CONFIG_DM_ETH in the same order as with > legacy ETH support to fix this. > > Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
