Hi Stefan, On Tue, Jun 27, 2017 at 1:23 PM, Stefan Roese <s...@denx.de> wrote: > Hi Bin, > > > On 27.06.2017 02:01, Bin Meng wrote: >> >> On Tue, Jun 27, 2017 at 2:07 AM, Marek Vasut <ma...@denx.de> wrote: >>> >>> On 06/24/2017 03:57 AM, Bin Meng wrote: >>>> >>>> Hi Marek, >>>> >>>> On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut <ma...@denx.de> wrote: >>>>> >>>>> On 06/23/2017 11:54 AM, Bin Meng wrote: >>>>>> >>>>>> xHCI spec says: the values of the 'route string' field shall be >>>>>> initialized by the first 'Address Device' command issued to a >>>>>> device slot, and shall not be modified by any other command. >>>>>> >>>>>> So far U-Boot does not program this field, and it does not prevent >>>>>> SS device directly attached to root port, or HS device behind an HS >>>>>> hub, from working, due to the fact that 'route string' is used by >>>>>> the xHC to target SS packets. But in order to enumerate devices >>>>>> behind an SS hub, this field must be programmed. >>>>>> >>>>>> With this commit and along with previous commits, now SS & HS devices >>>>>> attached to a USB 3.0 hub can be enumerated by U-Boot. >>>>>> >>>>>> As usual, this new feature is only available when DM is on. >>>>> >>>>> >>>>> Great, but I really dislike the ifdef pollution, so this needs to be >>>>> sorted out. >>>> >>>> >>>> The ifdef was needed due to it calls DM APIs or access DM udevice. I >>>> have no intention to add a new feature to the non-DM driver. >>> >>> >>> But then this creates a massive disparity, it's like we're growing two >>> USB stacks. >>> >> >> Yep, unfortunately. But if we continue adding new features/fixes to >> the old non-DM stuff, I am not sure how this can encourage people to >> switch to DM. > > > Correct. We definitely don't want to add new features to non-DM > drivers / IF, if this is non-trivial. > >> Maybe I can check all boards that use xHCI to see if >> they are switched to DM? > > > xHCI is still quite new in U-Boot, so I would expect that all > platforms using it, are using DM or at least not far away from using > it. Yes, please check all xHCI "users", if they use DM. Then we > know if and which users need some "persuasion" to switch over to > DM soon. ;)
I checked all boards that have CONFIG_USB_XHCI_HCD defined but without CONFIG_DM_USB. Here is the list. configs/uniphier_v8_defconfig:36:CONFIG_USB_XHCI_HCD=y configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig:62:CONFIG_USB_XHCI_HCD=y configs/am57xx_evm_nodt_defconfig:53:CONFIG_USB_XHCI_HCD=y configs/evb-rk3328_defconfig:34:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_nor_lpuart_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/uniphier_pxs2_ld6b_defconfig:44:CONFIG_USB_XHCI_HCD=y configs/ls1012ardb_qspi_SECURE_BOOT_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig:57:CONFIG_USB_XHCI_HCD=y configs/k2e_hs_evm_defconfig:34:CONFIG_USB_XHCI_HCD=y configs/ls1021aqds_sdcard_qspi_defconfig:61:CONFIG_USB_XHCI_HCD=y configs/am43xx_evm_ethboot_defconfig:48:CONFIG_USB_XHCI_HCD=y configs/xilinx_zynqmp_ep_defconfig:70:CONFIG_USB_XHCI_HCD=y configs/ls1021aqds_nand_defconfig:57:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_qspi_defconfig:50:CONFIG_USB_XHCI_HCD=y configs/k2g_evm_defconfig:45:CONFIG_USB_XHCI_HCD=y configs/am57xx_evm_defconfig:63:CONFIG_USB_XHCI_HCD=y configs/am43xx_hs_evm_defconfig:49:CONFIG_USB_XHCI_HCD=y configs/am43xx_evm_defconfig:39:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_nor_defconfig:42:CONFIG_USB_XHCI_HCD=y configs/firefly-rk3399_defconfig:59:CONFIG_USB_XHCI_HCD=y configs/puma-rk3399_defconfig:78:CONFIG_USB_XHCI_HCD=y configs/cl-som-am57x_defconfig:55:CONFIG_USB_XHCI_HCD=y configs/ls1021aqds_nor_SECURE_BOOT_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/uniphier_pro4_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig:61:CONFIG_USB_XHCI_HCD=y configs/xilinx_zynqmp_zcu102_defconfig:63:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_nor_SECURE_BOOT_defconfig:42:CONFIG_USB_XHCI_HCD=y configs/cm_t43_defconfig:67:CONFIG_USB_XHCI_HCD=y configs/k2g_hs_evm_defconfig:36:CONFIG_USB_XHCI_HCD=y configs/am43xx_evm_qspiboot_defconfig:45:CONFIG_USB_XHCI_HCD=y configs/ls1021aqds_qspi_defconfig:50:CONFIG_USB_XHCI_HCD=y configs/am57xx_hs_evm_defconfig:67:CONFIG_USB_XHCI_HCD=y configs/xilinx_zynqmp_zcu102_revB_defconfig:63:CONFIG_USB_XHCI_HCD=y configs/ls1021aqds_sdcard_ifc_defconfig:55:CONFIG_USB_XHCI_HCD=y configs/uniphier_ld20_defconfig:39:CONFIG_USB_XHCI_HCD=y configs/am43xx_evm_usbhost_boot_defconfig:61:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_sdcard_qspi_defconfig:61:CONFIG_USB_XHCI_HCD=y configs/evb-rk3399_defconfig:60:CONFIG_USB_XHCI_HCD=y configs/k2hk_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/k2hk_hs_evm_defconfig:34:CONFIG_USB_XHCI_HCD=y configs/k2e_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y configs/ls1021atwr_sdcard_ifc_defconfig:54:CONFIG_USB_XHCI_HCD=y configs/k2l_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y So it looks we have lots of conversion work to be done by many board maintainers. I am not sure how to proceed on this. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
