On Thu, 22 Jun 2017 19:55:21 +0200 daggs <da...@gmx.com> wrote: > Greetings, > > I'm using buildroot to generate images for the odroid c2 boards and > from what I see, it uses u-boot.bin to burn into the image. I'm not > seeing any other uboot product that is used for booting (unless I'm > mistaken). I'm reading the odroid c2 readme file and I see it > instructs the use to burn a alternative u-boot.bin from the one that > was created by the env. I wonder how it is possible to actually use > newer uboot when in the end uboot recommends to replace u-boot.bin > with pre existing one?
From the spec I do see that C2 has SD card and eMMC. I can only share my experience with Odroid XU3/U3. The boot process would (probably) require some signed blobs from hardkernel (those binaries are corresponding to u-boot-spl.bin). I can recommend looking to Hardkernel forum (they should have some topics dedicated for this SoM), or look for tizen.org wiki: https://wiki.tizen.org/Quick_guide_for_odroidxu3 I hope, that the boot flow is similar for XU3 and C2. > > Thanks, > > Dagg. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
