Hello Lukasz,
Am 26.06.2017 um 13:04 schrieb Lukasz Majewski:
After the commit SHA1: 842778a091 - the serial number descriptor is only
visible when we have non zero length of g_dnl_serial.
However, on some platforms (e.g. Siemens) the serial number is set at
g_dnl_bind_fixup(), so with the current code we will always omit the
serial (since it is not set).
This commit moves the g_dnl_bind_fixup() call before the g_dnl_serial
length test.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
Acked-by: Heiko Schocher <h...@denx.de>
---
drivers/usb/gadget/g_dnl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Just Tested on the smartweb board. Works fine!
Tested-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index d4bee9b..0491a0e 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -224,6 +224,8 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
g_dnl_string_defs[1].id = id;
device_desc.iProduct = id;
+ g_dnl_bind_fixup(&device_desc, cdev->driver->name);
+
if (strlen(g_dnl_serial)) {
id = usb_string_id(cdev);
if (id < 0)
@@ -233,7 +235,6 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
device_desc.iSerialNumber = id;
}
- g_dnl_bind_fixup(&device_desc, cdev->driver->name);
ret = g_dnl_config_register(cdev);
if (ret)
goto error;
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
