Hello Wenyou,
Am 21.06.2017 um 02:52 schrieb wenyou.y...@microchip.com:
-----Original Message-----
From: Heiko Schocher [mailto:h...@denx.de]
Sent: 2017年6月20日 22:05
To: Wenyou Yang - A41535 <wenyou.y...@microchip.com>
Cc: u-boot@lists.denx.de; Andreas Bießmann <biessm...@corscience.de>
Subject: at91: smartweb board fails with current HEAD
Hello Wenyou,
since your patch:
commit f8b7fff1d5c5297d290acab1e398bd410b0c2e68
Author: Wenyou Yang <wenyou.y...@atmel.com>
Date: Fri Apr 14 15:01:28 2017 +0800
serial: atmel_usart: Add clk support
smartweb board fails booting (and I fear at last all other at91 based siemens
boards also). Reverting your patch and U-Boot boots fine again.
First problem is, that I need now a bigger MALLOC_F_LEN space, but the value is
for SPL and U-Boot ... but in SPL I cannot increase this value, as I have only
4k
init ram.
So I need to configure a lower value in SPL as in U-Boot ... this is not
possible at
the moment... or?
After supporting the driver model and device tree, the size of SPL is beyond 4K.
SPL is not suitable in 4K internal SRAM
Hmm... no?
I have running a SPL (without DM/DTS support of course) from current mainline
source on the board.
Only problem is, that we need different MALLOC_F_LEN space in SPL and U-Boot
now!
added Simon Glass and Tom Rini, may I oversee some obvious config and/or
they have an idea?
Second problem: init of the uart seems to go now wrong, I have to add this
patch:
pollux:u-boot-at91sam9g45 hs [master] $ git diff diff --git
a/arch/arm/dts/at91sam9260-smartweb.dts b/arch/arm/dts/at91sam9260-
smartweb.dts
index faed763..e59781b 100644
--- a/arch/arm/dts/at91sam9260-smartweb.dts
+++ b/arch/arm/dts/at91sam9260-smartweb.dts
@@ -18,6 +18,7 @@
compatible = "atmel,at91sam9260", "atmel,at91sam9";
chosen {
+ u-boot,dm-pre-reloc;
stdout-path = &dbgu;
};
@@ -48,6 +49,7 @@
};
dbgu: serial@fffff200 {
+ u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index
48c8781..a769fc5 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -7,6 +7,7 @@ CONFIG_TARGET_SMARTWEB=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
CONFIG_FIT=y
@@ -33,6 +34,8 @@ CONFIG_CMD_FAT=y
# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
CONFIG_DFU_NAND=y
# CONFIG_MMC is not set
CONFIG_USB=y
May the other (none atmel) at91 based boards needs similiar fixes?
Yes, needs similar fixes.
:-(
So your patch broke all none atmel at91 boards?
Just trying on the at91 based corvus board, same problem, but the
same fixes did not yet help ... need more debug time here ...
The taurus board is currently down, after fixing the smartweb and corvus
boards, I hope to get it running again, but I think, same problem.
BTW: This is again a good example how important it is to use automated
tests, may with tbot [1] I only detected this, because I have running
automated weekly U-Boot mainline tests. I think we have a lot of (not
only at91) dead/untested boards in code ...
bye,
Heiko
[1] https://github.com/hsdenx/tbot
https://tbot.tools/
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
