Sorry. Somehow I left out the subject from this. I resent just the cover letter with the proper subject.
On 06/16/2017 05:25 PM, Franklin S Cooper Jr wrote: > This patchset adds support for the new Keystone 2 Industrial Communication > Engine board. > > This patchset includes the introduction of embedded FIT images in U-boot. > This creates a FIT image of dtb files that enables board specific code to > select which DTB to use at runtime. Initially during boot a generic DTB is > required that enables board detection to occur and once it has can later be > swapped out for the correct dtb. > > Version 4 changes: > Rebased on top of master. > Tweaks done to patches 2 and 3 since functions have been added and tweaked > in spl_fit.c. > Left reviewed by as is since changes weren't drastic. > > Version 3 changes: > Fixed minor comments that were missed in rev 2. > > Version 2 changes: > Some patches were dropped since equivalent changes have already be > incorporated in upstream already. > > The addition davinci i2c device model in upstream resulted in some > patches having to be added or tweaked. > > The DT for K2G ICE is based on the version that has been accepted into > Linux mainline https://lkml.org/lkml/2017/5/22/28 > > Franklin S Cooper Jr (29): > spl: fit: Break out some functions into a common file > boot_fit: Create helper functions that can be used to select DTB out > of FIT > fdt: Enable selecting correct DTB from appended FIT Image > ti: common: board_detect: Add function to determine if EEPROM was read > dts: Allow OF_LIST to depend on FIT_EMBED > ARM: dts: k2g: Introduce U-boot specific dtsi file > arm: dts: Add new "generic" 66AK2Gx device tree file. > board_f: Add new function to allow runtime DTB selection > Makefile: Build additional binaries for dtb FIT blobs appended to > U-boot > ARM: keystone2: Allow to build with all image formats > ARM: k2g: Define embedded_dtb_select for runtime DTB selection in > U-boot > ARM: keystone2: Define board_fit_config_name_match for Keystone 2 > boards > ks2_evm: Add EEPROM based board detection > defconfig: keystone2: Enable U-boot runtime DTB detection > ARM: keystone2: Add additional fields used for DDR3 configuration > ARM: k2g: Program DDR PHY MR2 register with the default value > ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables > ks2_evm: Add EEPROM based board detection helper functions > ARM: k2g: Add pinmux support for K2G ICE evm > ARM: k2g: Add DDR3 configuration for K2G ICE evm > board: ks2: Use board detection to wrap code not specific to K2G ICE > evm > ARM: k2g: Use board detection to wrap K2G GP specific calls > ARM: k2g: Update board_name u-boot env variable at runtime > ARM: dts: keystone-k2g: Remove skeleton.dtsi > ARM: dts: keystone-k2g-evm: Add unit address to memory node > ARM: dts: k2g: Disable netcp by default > ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine > evm > ARM: k2g: Add K2G ICE DTB to the list of possible DTBs > defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LIST > > Nishanth Menon (1): > ti: common: board_detect: Allow settings board detection variables > manually > > .gitignore | 1 + > Makefile | 18 +++++- > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/keystone-k2g-evm-u-boot.dtsi | 19 ++++++ > arch/arm/dts/keystone-k2g-evm.dts | 9 +++ > arch/arm/dts/keystone-k2g-generic-u-boot.dtsi | 19 ++++++ > arch/arm/dts/keystone-k2g-generic.dts | 28 +++++++++ > arch/arm/dts/keystone-k2g-ice-u-boot.dtsi | 19 ++++++ > arch/arm/dts/keystone-k2g-ice.dts | 36 +++++++++++ > arch/arm/dts/keystone-k2g-netcp.dtsi | 1 + > arch/arm/dts/keystone-k2g.dtsi | 8 +-- > arch/arm/mach-keystone/config.mk | 4 +- > arch/arm/mach-keystone/ddr3.c | 35 ++++++++--- > arch/arm/mach-keystone/include/mach/ddr3.h | 14 +++++ > arch/arm/mach-keystone/include/mach/hardware.h | 3 + > board/ti/common/board_detect.c | 34 ++++++++++ > board/ti/common/board_detect.h | 26 ++++++++ > board/ti/ks2_evm/board.c | 21 +++++-- > board/ti/ks2_evm/board.h | 21 +++++++ > board/ti/ks2_evm/board_k2e.c | 10 +++ > board/ti/ks2_evm/board_k2g.c | 86 > +++++++++++++++++++++++--- > board/ti/ks2_evm/board_k2hk.c | 10 +++ > board/ti/ks2_evm/board_k2l.c | 10 +++ > board/ti/ks2_evm/ddr3_k2g.c | 78 ++++++++++++++++++++++- > board/ti/ks2_evm/mux-k2g.h | 45 +++++++++++++- > common/Kconfig | 16 +++++ > common/Makefile | 2 + > common/board_f.c | 3 + > common/boot_fit.c | 80 ++++++++++++++++++++++++ > common/common_fit.c | 62 +++++++++++++++++++ > common/spl/spl_fit.c | 54 +--------------- > configs/k2e_evm_defconfig | 3 + > configs/k2g_evm_defconfig | 3 + > configs/k2hk_evm_defconfig | 3 + > configs/k2l_evm_defconfig | 3 + > dts/Kconfig | 11 ++-- > include/boot_fit.h | 9 +++ > include/common.h | 4 ++ > include/configs/k2g_evm.h | 13 +++- > include/image.h | 10 +++ > lib/fdtdec.c | 10 +++ > 41 files changed, 749 insertions(+), 96 deletions(-) > create mode 100644 arch/arm/dts/keystone-k2g-evm-u-boot.dtsi > create mode 100644 arch/arm/dts/keystone-k2g-generic-u-boot.dtsi > create mode 100644 arch/arm/dts/keystone-k2g-generic.dts > create mode 100644 arch/arm/dts/keystone-k2g-ice-u-boot.dtsi > create mode 100644 arch/arm/dts/keystone-k2g-ice.dts > create mode 100644 common/boot_fit.c > create mode 100644 common/common_fit.c > create mode 100644 include/boot_fit.h > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
