Hi Stefan, On Fri, Jun 16, 2017 at 9:31 PM, Bin Meng <bmeng...@gmail.com> wrote: > Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS, > remove it in all boards' config files. > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > --- > > include/configs/am43xx_evm.h | 1 - > include/configs/am57xx_evm.h | 1 - > include/configs/cl-som-am57x.h | 1 - > include/configs/cm_t43.h | 1 - > include/configs/dra7xx_evm.h | 1 - > include/configs/ds414.h | 1 - > include/configs/exynos5-common.h | 1 - > include/configs/ls1012afrdm.h | 1 - > include/configs/ls1012aqds.h | 1 - > include/configs/ls1012ardb.h | 1 - > include/configs/ls1021aiot.h | 1 - > include/configs/ls1021aqds.h | 1 - > include/configs/ls1021atwr.h | 1 - > include/configs/ls1043aqds.h | 1 - > include/configs/ls1043ardb.h | 1 - > include/configs/ls1046aqds.h | 1 - > include/configs/ls1046ardb.h | 1 - > include/configs/ls2080aqds.h | 1 - > include/configs/ls2080ardb.h | 1 - > include/configs/mvebu_armada-37xx.h | 4 +--- > include/configs/mvebu_armada-8k.h | 4 +--- > include/configs/rk3328_common.h | 2 -- > include/configs/rk3399_common.h | 3 --- > include/configs/ti_armv7_keystone2.h | 1 - > include/configs/uniphier.h | 3 --- > include/configs/xilinx_zynqmp.h | 2 -- > scripts/config_whitelist.txt | 1 - > 27 files changed, 2 insertions(+), 37 deletions(-) >
[snip] > diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h > index 2dab065..0a4c90c 100644 > --- a/include/configs/ls2080ardb.h > +++ b/include/configs/ls2080ardb.h > @@ -349,7 +349,6 @@ unsigned long get_board_sys_clk(void); > #define CONFIG_HAS_FSL_XHCI_USB > #define CONFIG_USB_XHCI_FSL > #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 > -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 > > #undef CONFIG_CMDLINE_EDITING > #include <config_distro_defaults.h> > diff --git a/include/configs/mvebu_armada-37xx.h > b/include/configs/mvebu_armada-37xx.h > index 5408490..7a255a1 100644 > --- a/include/configs/mvebu_armada-37xx.h > +++ b/include/configs/mvebu_armada-37xx.h > @@ -98,10 +98,8 @@ > #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 > > /* USB 3.0 */ > -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 > - > #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS > + \ > - CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) > + 3) I strongly suspect here CONFIG_USB_MAX_CONTROLLER_COUNT is mistakenly configured, unless each host controller only has 1 root port? Please review. > > /* USB ethernet */ > #define CONFIG_USB_HOST_ETHER > diff --git a/include/configs/mvebu_armada-8k.h > b/include/configs/mvebu_armada-8k.h > index 9d3aeef..c29d7f9 100644 > --- a/include/configs/mvebu_armada-8k.h > +++ b/include/configs/mvebu_armada-8k.h > @@ -104,10 +104,8 @@ > #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 > > /* USB 3.0 */ > -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 > - > #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS > + \ > - CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) > + 3) ditto. > > /* USB ethernet */ > #define CONFIG_USB_HOST_ETHER [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
