On 06/14/2017 02:24 PM, Vignesh R wrote: > > > On Tuesday 13 June 2017 07:36 PM, Marek Vasut wrote: >> On 06/13/2017 02:10 PM, Vignesh R wrote: >>> Provide a way to read MAC address for usb_ether device from board >>> function. Board files can override board_set_usbnet_devaddr() to >>> populate MAC address to be used by usb_ether as device address. >>> >>> Signed-off-by: Vignesh R <vigne...@ti.com> >> >> This patch is totally unrelated to this series. > > This series converts dwc3 peripheral to device model and the best way to > test this on TI platform to use it on ether gadget and test RNDIS boot. > Hence, I had to do patches 8 to 13. Therefore I posted them together for > completeness, if somebody wanted to test this out.
Testing is great, but this is probably a fix and it's unrelated to the series anyway. >> Moreover, just set eth*addr using setenv() to achieve the same iirc . >> > > eth*addr is used for regular ethernet interface and usually set by > regular ethernet driver, but I could not find a way to set MAC address > for usb ethernet interface > Board file will now override board_set_usbnet_devaddr() to read MAC and > then call setenv() Lukasz should be able to jump in and help. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
