On Sun, May 28, 2017 at 12:55:10PM -0700, Vikas Manocha wrote: > This commit supports booting from stm32 internal nor flash. spl U-Boot > initializes the sdram memory, copies next image (e.g. standard U-Boot) > to sdram & then jumps to entry point. > > Here are the flash memory addresses for U-Boot-spl & standard U-Boot: > - spl U-Boot : 0x0800_0000 > - standard U-Boot : 0x0800_8000 > > To compile u-boot without spl: Remove SUPPORT_SPL configuration > (arch/arm/mach-stm32/Kconfig) > > Signed-off-by: Vikas Manocha <vikas.mano...@st.com>
I had to rework the Kconfig locations here slightly (and in follow-up patches) to have the main select's be under STM32F7 in arch/arm/mach-stm32/Kconfig as it's not right to introduce a second 'config SUPPORT_SPL\nselect ...' stanza inside of arch/arm/mach-stm32/stm32f7/Kconfig. Reviewed-by: Tom Rini <tr...@konsulko.com> -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
