Ajay Kumar Gupta wrote:
> USB0_DRVVBUS pinmux configuration is required for USB functinality
> in uboot.
>
> Signed-off-by: Ajay Kumar Gupta <[email protected]>
> Signed-off-by: Swaminathan S <[email protected]>
> ---
> This patch set is created against Nick Thompson's latest patch set
> (v5) on DA8xx support and another patch from him on Davinci pinmux.
> [Davinci: add a pin multiplexer configuration API]
It is difficult to review code that is dependent on other outstanding
patches.
The base DA8xx support will be in arm-ti branch shortly.
Please rebase these patches when this happens and resubmit.
Tom
>
> board/davinci/da830evm/da830evm.c | 8 ++++++++
> 1 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/board/davinci/da830evm/da830evm.c
> b/board/davinci/da830evm/da830evm.c
> index bb8cc3c..7cf6013 100644
> --- a/board/davinci/da830evm/da830evm.c
> +++ b/board/davinci/da830evm/da830evm.c
> @@ -65,6 +65,11 @@ const struct pinmux_config i2c_pins[] = {
> { pinmux[9], 2, 4 }
> };
>
> +/* USB0_DRVVBUS pin muxer settings */
> +const struct pinmux_config usb_pins[] = {
> + { pinmux[9], 1, 1 }
> +};
> +
> int board_init(void)
> {
> #ifndef CONFIG_USE_IRQ
> @@ -118,6 +123,9 @@ int board_init(void)
> if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
> return 1;
>
> + if (davinci_configure_pin_mux(usb_pins, ARRAY_SIZE(usb_pins)) != 0)
> + return 1;
> +
> /* enable the console UART */
> writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
> DAVINCI_UART_PWREMU_MGMT_UTRST),
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
