s...@google.com schrieb am 01.06.2017 05:11:57:
> <hannes.schmel...@br-automation.com> wrote:
> > With this commit we can modify single values within an array of a dts
> > property.
> >
> > This is useful if we have for example a pwm-backlight where we want to
> > modifiy the pwm frequency per u-boot script.
> >
> > The pwm is described in dts like this:
> >
> > backlight {
> > pwms = <0x0000002b 0x00000000 0x004c4b40>;
> > };
> >
> > For changing the frequency, here the 3rd parameter, we simply type:
> >
> > fdt set /backlight pwms <? ? 0x1E8480>;
> >
> > For doing all this we:
> > - backup the property content into our 'SCRATCHPAD'
> > - only modify the array-cell if the new content doesn't start with '?'
> >
> > Signed-off-by: Hannes Schmelzer <hannes.schmel...@br-automation.com>
> >
> > ---
> >
> > cmd/fdt.c | 29 +++++++++++++++++++++--------
> > 1 file changed, 21 insertions(+), 8 deletions(-)
>
> Reviewed-by: Simon Glass <s...@chromium.org>
>
> I imagine this would have to be done before setting 'stdout' to
> 'vidconsole' so that the PWM is not inited before this script runs.
Yes, if lcd output is used already in u-boot this is correct.
For my case i don't have any output in u-boot, but later on within linux
environment.
But setting some pwm frequency is only one example for using this, every
other array-property can also be modified with this.
cheers,
Hannes
Applied to u-boot-dm, thanks!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
