Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well.
Signed-off-by: Mike Looijmans <mike.looijm...@topic.nl> --- README | 6 ------ configs/topic_miamiplus_defconfig | 3 ++- drivers/mtd/spi/Kconfig | 7 +++++++ include/configs/topic_miami.h | 1 - include/configs/topic_miamiplus.h | 2 -- scripts/config_whitelist.txt | 1 - 6 files changed, 9 insertions(+), 11 deletions(-) delete mode 100644 include/configs/topic_miamiplus.h diff --git a/README b/README index 9d351ec..c481016 100644 --- a/README +++ b/README @@ -2639,12 +2639,6 @@ The following options need to be configured: Define this option to include a destructive SPI flash test ('sf test'). - CONFIG_SF_DUAL_FLASH Dual flash memories - - Define this option to use dual flash support where two flash - memories can be connected with a given cs line. - Currently Xilinx Zynq qspi supports these type of connections. - - SystemACE Support: CONFIG_SYSTEMACE diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 10762f8..535ce6d 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="topic" -CONFIG_SYS_CONFIG_NAME="topic_miamiplus" +CONFIG_SYS_CONFIG_NAME="topic_miami" CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt" @@ -28,6 +28,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 5ca0a71..5700859 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -42,6 +42,13 @@ config SPI_FLASH_BAR Bank/Extended address registers are used to access the flash which has size > 16MiB in 3-byte addressing. +config SF_DUAL_FLASH + bool "SPI DUAL flash memory support" + depends on SPI_FLASH + help + Enable this option to support two flash memories connected to a single + controller. Currently Xilinx Zynq qspi supports this. + if SPI_FLASH config SPI_FLASH_ATMEL diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index a289225..ee46d3a 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -56,7 +56,6 @@ #undef CONFIG_SF_DEFAULT_SPEED #define CONFIG_SF_DEFAULT_SPEED 108000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#undef CONFIG_SF_DUAL_FLASH #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #undef CONFIG_SPI_FLASH_WINBOND #undef CONFIG_SPI_FLASH_ISSI diff --git a/include/configs/topic_miamiplus.h b/include/configs/topic_miamiplus.h deleted file mode 100644 index 46ca6bd..0000000 --- a/include/configs/topic_miamiplus.h +++ /dev/null @@ -1,2 +0,0 @@ -#include "topic_miami.h" -#define CONFIG_SF_DUAL_FLASH diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e8f49eb..642c433 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2401,7 +2401,6 @@ CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED -CONFIG_SF_DUAL_FLASH CONFIG_SGI_IP28 CONFIG_SH4_PCI CONFIG_SH73A0 -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot