Hi Tom, On 31 May 2017 14:10 Tom Rini wrote: > On Wed, May 31, 2017 at 08:27:05AM +0100, Phil Edworthy wrote: > > > The branch instruction only has an 11-bit relative target address, > > which is sometimes not enough. > > > > Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com> > > --- > > v2: > > - Use W(b) instead of ldr+mov. Using this macro requires > > CONFIG_ARM_ASM_UNIFIED and CONFIG_THUMB2_KERNEL to be > defined. > > --- > > arch/arm/cpu/armv7m/Makefile | 3 +++ > > arch/arm/cpu/armv7m/start.S | 4 +++- > > 2 files changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/cpu/armv7m/Makefile > > b/arch/arm/cpu/armv7m/Makefile index 257fc7f..df1fc95 100644 > > --- a/arch/arm/cpu/armv7m/Makefile > > +++ b/arch/arm/cpu/armv7m/Makefile > > @@ -8,3 +8,6 @@ > > extra-y := start.o > > obj-y += cpu.o cache.o mpu.o > > obj-$(CONFIG_SYS_ARCH_TIMER) += systick-timer.o > > + > > +asflags-y += -DCONFIG_ARM_ASM_UNIFIED asflags-y += > > +-DCONFIG_THUMB2_KERNEL > > Lets move these two symbols to Kconfig and select them on CPU_V7M, > thanks!
These two symbols come from Linux asm files that have been simply copied over to U-Boot, they are not configuration options in U-Boot. They are used by both CPU_V7M and others. Perhaps I have misunderstood, but for non-CPU_V7M, since CONFIG_THUMB2_KERNEL depends on CONFIG_SYS_THUMB_BUILD, are you asking me to add Kconfig for CONFIG_SYS_THUMB_BUILD? Thanks Phil > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot