Hi,
seems like you beat me to that, I had as similar patch ready, but wanted
to wait for the A64 DTS update to be accepted (and merged).
It looks like you depend on that as well?
On 26/05/17 10:21, Jagan Teki wrote:
> From: Jagan Teki <ja...@openedev.com>
>
> BPI-M64 is a 64-bit quad-core mini single board computer
> using the Allwinner A64 SOC.
>
> BPI-M64 features
> - 1.2 Ghz Quad-Core ARM Cortex A53
> - 2GB DDR3 SDRAM with 733MHz
> - MicroSD/eMMC(8GB)
> - 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
By using the below approach and depending on the updated DT you will
loose Ethernet access. You will need to copy and adjust the -u-boot.dtsi
file from the Pine64 Plus.
However we might want to wait if there is another solution short from
having a bunch of virtually identical -u-boot.dtsi files for every
board. If someone (Tom?) comes up with a way of allowing multiple,
possibly shared .dtsi files, we can simplify this whole thing.
> - Wifi + BT
> - IR receiver
> - Audio In/Out
> - Video In/Out
> - 5V 2A DC power-supply
>
> For dts file,
> Sync with Linux commit 4879b7ae("Merge tag 'dmaengine-4.12-rc1'").
>
> Signed-off-by: Jagan Teki <ja...@openedev.com>
> ---
> Note: Not tested yet, board is on-the-way to reach.
You should be very careful with that ;-)
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-a64-bananapi-m64.dts | 114
> +++++++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 5 ++
> configs/bananapi_m64_defconfig | 16 +++++
> 4 files changed, 136 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64.dts
> create mode 100644 configs/bananapi_m64_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index a59395b..242b329 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -319,6 +319,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-orangepi-prime.dtb \
> sun50i-h5-orangepi-zero-plus2.dtb
> dtb-$(CONFIG_MACH_SUN50I) += \
> + sun50i-a64-bananapi-m64.dtb \
> sun50i-a64-orangepi-win.dtb \
> sun50i-a64-pine64-plus.dtb \
> sun50i-a64-pine64.dtb
> diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
> b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
> new file mode 100644
> index 0000000..9001812
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Copyright (c) 2016 ARM Ltd.
> + * Copyright (C) 2017 Jagan Teki <jt...@openedev.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "BananaPi-M64";
> + compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + status = "okay";
> +};
> +
> +&i2c1_pins {
> + bias-pull-up;
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + disable-wp;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 4bcfe9b..0bdff84 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -119,6 +119,11 @@ S: Maintained
> F: configs/Bananapi_M2_Ultra_defconfig
> F: arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
>
> +BANANAPI M64
> +M: Jagan Teki <ja...@amarulasolutions.com>
> +S: Maintained
> +F: configs/bananapi_m64_defconfig
> +
> COLOMBUS BOARD
> M: Maxime Ripard <maxime.rip...@free-electrons.com>
> S: Maintained
> diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
> new file mode 100644
> index 0000000..2241952
> --- /dev/null
> +++ b/configs/bananapi_m64_defconfig
> @@ -0,0 +1,16 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN50I=y
> +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_CONSOLE_MUX=y
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_ISO_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SUN8I_EMAC=y
> +CONFIG_USB_EHCI_HCD=y
You are missing the board's killer feature here: the eMMC:
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
Cheers,
Andre.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
