Hi Fabio, i tried both solutions without any output.
------------------------------ *Ing. Fausto Sessego* *R&D Hardware & Software Engineer* info mob > *Tecnologie Wireless per la logistica e la sicurezza* *address:* Parco scientifico e tecnologico della Sardegna, Edificio 1 Loc. Piscinamanna - 09010 Pula (CA) <https://www.google.it/maps/place/Sardegna+Ricerche/@38.9899811,8.9280376,17z/data=!3m1!4b1!4m2!3m1!1s0x12e7274e0b4c4191:0x1a9e7f06456bbd3> *phone:* +39 070 92432952 *email:* fausto.sess...@infomob.it *skype:* fausto.sessego.infomob *web:* www.infomob.it 2017-05-26 14:36 GMT+02:00 Fabio Estevam <feste...@gmail.com>: > Hi Fausto, > > On Fri, May 26, 2017 at 7:39 AM, Fausto Sessego <fausto.sess...@infomob.it > > wrote: > >> >> >> #define CONFIG_BOOTCOMMAND \ >> "run mmcargs; " \ >> "run loadfdt; " \ >> "run loadimage; " \ >> "bootz ${loadaddr} - ${fdt_addr}; "\ >> > > The bootz command expects a zImage type of kernel. > > In your previous message you were passing uImage, so what you should do is: > > 1.Pass a zImage and use it with bootz > > or > > 2. Pass a uImage and use it with bootm. > > Hope this helps. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot