On 05/15/2017 05:52 AM, tien.fong.c...@intel.com wrote: > From: Tien Fong Chee <tien.fong.c...@intel.com> > > Move FPGA driver which is Gen5 specific code into Gen5 driver file > and keeping common FPGA drivi er intact. All the changes are still keeping > in driver/fpga/ and no functional change. Subsequent patch would move > FPGA manager driver from arch/arm into driver/fpga/ . > > Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com> > --- > arch/arm/mach-socfpga/Makefile | 2 +- > arch/arm/mach-socfpga/include/mach/fpga_manager.h | 68 +----- > .../mach/{fpga_manager.h => fpga_manager_gen5.h} | 69 +++--- > drivers/Makefile | 1 + > drivers/fpga/Makefile | 1 + > drivers/fpga/socfpga.c | 241 > +-------------------- > drivers/fpga/{socfpga.c => socfpga_gen5.c} | 54 +---- > 7 files changed, 50 insertions(+), 386 deletions(-) > copy arch/arm/mach-socfpga/include/mach/{fpga_manager.h => > fpga_manager_gen5.h} (57%) > copy drivers/fpga/{socfpga.c => socfpga_gen5.c} (83%) >
[snip] > diff --git a/drivers/Makefile b/drivers/Makefile > index 4a4b237..b4a2230 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -47,6 +47,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ > obj-$(CONFIG_SPL_SATA_SUPPORT) += block/ > obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/ > obj-$(CONFIG_SPL_MMC_SUPPORT) += block/ > +obj-$(CONFIG_FPGA) += fpga/ You're adding the FPGA driver to SPL with this change. This should be for Arria10 only right? It should be in a different patch. Dinh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot