On Sat, Mar 4, 2017 at 7:05 PM, Tom Rini <tr...@konsulko.com> wrote: > On Sat, Mar 04, 2017 at 06:36:28PM +0000, Peter Robinson wrote: >> The Cubox-i and Hummingboard series of devices have an option of >> SATA on board, and depending on how the fuses are blown even the >> option to boot SPL from SATA. So enable support for it so it can >> be used to boot the OS from if people desire. >> >> Signed-off-by: Peter Robinson <pbrobin...@gmail.com> >> --- >> board/solidrun/mx6cuboxi/mx6cuboxi.c | 7 +++++++ >> include/configs/mx6cuboxi.h | 12 ++++++++++++ > [snip] >> +/* SATA Configuration */ >> +#define CONFIG_CMD_SATA >> +#ifdef CONFIG_CMD_SATA > > Please move CMD_SATA to cmd/Kconfig. You don't have to migrate everyone > over.
New patch series, well one for the CMD_SATA stuff, coming that I believe addresses that. >> +#define CONFIG_DWC_AHSATA >> +#define CONFIG_SYS_SATA_MAX_DEVICE 1 >> +#define CONFIG_DWC_AHSATA_PORT_ID 0 >> +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR >> +#define CONFIG_LBA48 >> +#define CONFIG_LIBATA > > Bonus points if you move some these over to the existing sata section on > drivers/block/Kconfig :) I'm looking at a few of those as well but I'll send that separately. Patches inbound shortly, sorry for the delays. Peter _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
