The GMAC_TX_DELAY symbol sets and is dependent on the SUN7I_GMAC
driver. Move it from the generic ARCH section to the driver specific
section.
Signed-off-by: Olliver Schinagl <oli...@schinagl.nl>
---
arch/arm/mach-sunxi/Kconfig | 6 ------
drivers/net/Kconfig | 7 +++++++
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 8d9900e00b..be060b65dc 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -748,12 +748,6 @@ config SATAPWR
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
port H.
-config GMAC_TX_DELAY
- int "GMAC Transmit Clock Delay Chain"
- default 0
- ---help---
- Set the GMAC Transmit Clock Delay Chain value.
-
config SPL_STACK_R_ADDR
default 0x4fe00000 if MACH_SUN4I
default 0x4fe00000 if MACH_SUN5I
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 04e8cf39c8..782348f872 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -219,6 +219,13 @@ config SUN7I_GMAC
endchoice
+config GMAC_TX_DELAY
+ depends on SUN7I_GMAC
+ int "- GMAC Transmit Clock Delay Chain"
+ default 0
+ help
+ Set the GMAC Transmit Clock Delay Chain value.
+
config SUN8I_EMAC
bool "Allwinner Sun8i Ethernet MAC support"
depends on DM_ETH
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
