The FriendlyARM NanoPi K2 is a single-board computer.
The Device Tree is taken from the v1 kernel patchset.
Cc: techsupp...@friendlyarm.com
Signed-off-by: Andreas Färber <afaer...@suse.de>
---
arch/arm/dts/meson-gxbb-nanopi-k2.dts | 152 ++++++++++++++++++++++++++++++++++
arch/arm/mach-meson/Kconfig | 8 ++
board/amlogic/nanopi-k2/Kconfig | 12 +++
board/amlogic/nanopi-k2/MAINTAINERS | 6 ++
board/amlogic/nanopi-k2/Makefile | 7 ++
board/amlogic/nanopi-k2/nanopi-k2.c | 54 ++++++++++++
configs/nanopi-k2_defconfig | 30 +++++++
include/configs/nanopi-k2.h | 19 +++++
8 files changed, 288 insertions(+)
create mode 100644 arch/arm/dts/meson-gxbb-nanopi-k2.dts
create mode 100644 board/amlogic/nanopi-k2/Kconfig
create mode 100644 board/amlogic/nanopi-k2/MAINTAINERS
create mode 100644 board/amlogic/nanopi-k2/Makefile
create mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c
create mode 100644 configs/nanopi-k2_defconfig
create mode 100644 include/configs/nanopi-k2.h
diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts
b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
new file mode 100644
index 0000000000..a42c89fc75
--- /dev/null
+++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_ao3v3: regulator-vddio-ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_tf: gpio-regulator-vddio-tf {
+ compatible = "regulator-gpio";
+
+ regulator-name = "VDDIO_TF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ };
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "disabled";
+};
+
+/* SD */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddio_ao3v3>;
+ vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index af3be59097..d7ef715b7c 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -18,6 +18,13 @@ config TARGET_ODROID_C2
with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
slot, eMMC, IR receiver and a 40-pin GPIO header.
+config TARGET_NANOPI_K2
+ bool "NanoPi K2"
+ help
+ NanoPi K2 is a single-board computer based on Meson GXBaby
+ with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro SD
+ slot, eMMC, IR receiver and a 40-pin GPIO header.
+
endif
config SYS_SOC
@@ -26,6 +33,7 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x1000
+source "board/amlogic/nanopi-k2/Kconfig"
source "board/amlogic/odroid-c2/Kconfig"
endif
diff --git a/board/amlogic/nanopi-k2/Kconfig b/board/amlogic/nanopi-k2/Kconfig
new file mode 100644
index 0000000000..374bda200c
--- /dev/null
+++ b/board/amlogic/nanopi-k2/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_NANOPI_K2
+
+config SYS_BOARD
+ default "nanopi-k2"
+
+config SYS_VENDOR
+ default "amlogic"
+
+config SYS_CONFIG_NAME
+ default "nanopi-k2"
+
+endif
diff --git a/board/amlogic/nanopi-k2/MAINTAINERS
b/board/amlogic/nanopi-k2/MAINTAINERS
new file mode 100644
index 0000000000..75a29c3ab1
--- /dev/null
+++ b/board/amlogic/nanopi-k2/MAINTAINERS
@@ -0,0 +1,6 @@
+NANOPI-K2
+M: Andreas Färber <afaer...@suse.de>
+S: Maintained
+F: board/amlogic/nanopi-k2/
+F: include/configs/nanopi-k2.h
+F: configs/nanopi-k2_defconfig
diff --git a/board/amlogic/nanopi-k2/Makefile b/board/amlogic/nanopi-k2/Makefile
new file mode 100644
index 0000000000..9594480017
--- /dev/null
+++ b/board/amlogic/nanopi-k2/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2017 Andreas Färber
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := nanopi-k2.o
diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c
b/board/amlogic/nanopi-k2/nanopi-k2.c
new file mode 100644
index 0000000000..b61daaa4a7
--- /dev/null
+++ b/board/amlogic/nanopi-k2/nanopi-k2.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galv...@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/sm.h>
+#include <dm/platdata.h>
+#include <phy.h>
+
+#define EFUSE_SN_OFFSET 20
+#define EFUSE_SN_SIZE 16
+#define EFUSE_MAC_OFFSET 52
+#define EFUSE_MAC_SIZE 6
+
+int board_init(void)
+{
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u8 mac_addr[EFUSE_MAC_SIZE];
+ ssize_t len;
+
+ /* Set RGMII mode */
+ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+ GXBB_ETH_REG_0_TX_PHASE(1) |
+ GXBB_ETH_REG_0_TX_RATIO(4) |
+ GXBB_ETH_REG_0_PHY_CLK_EN |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+ /* Reset PHY on GPIOZ_14 */
+ clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
+ clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ mdelay(10);
+ setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+ mac_addr, EFUSE_MAC_SIZE);
+ if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ return 0;
+}
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
new file mode 100644
index 0000000000..e6420f75d2
--- /dev/null
+++ b/configs/nanopi-k2_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MESON=y
+CONFIG_MESON_GXBB=y
+CONFIG_TARGET_NANOPI_K2=y
+CONFIG_IDENT_STRING=" nanopi-k2"
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-nanopi-k2"
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_GXBB=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
diff --git a/include/configs/nanopi-k2.h b/include/configs/nanopi-k2.h
new file mode 100644
index 0000000000..0cddb163a3
--- /dev/null
+++ b/include/configs/nanopi-k2.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MISC_INIT_R
+
+/* Serial setup */
+#define CONFIG_CONS_INDEX 0
+
+#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-nanopi-k2.dtb\0"
+
+#include <configs/meson-gxbb-common.h>
+
+#endif /* __CONFIG_H */
--
2.12.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
