Drop use of this long-deprecated option.
Signed-off-by: Simon Glass <s...@chromium.org>
Suggested-by: Lokesh Vutla <lokeshvu...@ti.com>
---
Changes in v3: None
Changes in v2:
- Add new patch to adjust omap boards to not need CONFIG_I2C_HARD
board/ti/am335x/board.c | 3 ++-
board/ti/am43xx/board.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 3e81521399..517965c0f0 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -72,7 +72,8 @@ void do_board_detect(void)
enable_i2c0_pin_mux();
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+ if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS))
printf("ti_i2c_eeprom_init failed\n");
}
#endif
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index f633e2f85d..f44103d4d6 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -42,7 +42,8 @@ static struct ctrl_dev *cdev = (struct ctrl_dev
*)CTRL_DEVICE_BASE;
#ifdef CONFIG_TI_I2C_BOARD_DETECT
void do_board_detect(void)
{
- if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+ if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS))
printf("ti_i2c_eeprom_init failed\n");
}
#endif
--
2.13.0.rc2.291.g57267f2277-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
