Hi Bin, On 8 May 2017 at 01:05, Bin Meng <bmeng...@gmail.com> wrote: > Hi Simon, > > On Mon, Apr 10, 2017 at 8:38 AM, Simon Glass <s...@chromium.org> wrote: >> This is not to be applied. It is needed to test using CONFIG_DM_MMC on x86 >> since SCSI is broken with this setup. >> >> Signed-off-by: Simon Glass <s...@chromium.org> >> --- > > When you said "SCSI is broken with this setup", did you mean GP# > exception when boot up with a hard disk like below?
Yes that's right. > > SCSI: Target spinup took 0 ms. > SATA link 1 timeout. > AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > flags: 64bit ncq stag pm led clo pio slum part sxs > scanning bus for devices... > General Protection > EIP: 0010:[<46174204>] EFLAGS: 00010202 > Original EIP :[<cab17204>] > EAX: 00000000 EBX: 46174204 ECX: 00000000 EDX: 00000000 > ESI: 7b347f80 EDI: 7b5c3fc8 EBP: 7b3481c4 ESP: 7b347f58 > DS: 0018 ES: 0018 FS: 0020 GS: 0018 SS: 0018 > CR0: 00000033 CR2: 00000000 CR3: 00000000 CR4: 00000600 > DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 > DR6: ffff0ff0 DR7: 00000400 > Stack: > 0x7b347f98 : 0x20202020 > 0x7b347f94 : 0x20202020 > 0x7b347f90 : 0x00000000 > 0x7b347f8c : 0x0000003f > 0x7b347f88 : 0x00000000 > 0x7b347f84 : 0x0010c837 > 0x7b347f80 : 0x3fff0c5a > 0x7b347f7c : 0x7b585f7d > 0x7b347f78 : 0x7b347f80 > 0x7b347f74 : 0x00000000 > 0x7b347f70 : 0x00000001 > 0x7b347f6c : 0x7b57b01d > 0x7b347f68 : 0x7b5c3fc8 > 0x7b347f64 : 0x7b347f80 > 0x7b347f60 : 0x00000000 > 0x7b347f5c : 0x00000001 > --->0x7b347f58 : 0x7b57cd1a > 0x7b347f54 : 0x00010202 > 0x7b347f50 : 0x00000010 > 0x7b347f4c : 0x46174204 > ### ERROR ### Please RESET the board ### > > > [snip] > > Regards, > Bin - Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
