From: Kishon Vijay Abraham I <kis...@ti.com>

Add a new callback function *set_vdd* which can be used
by the platform mmc driver to enable or disable vdd.
The mmc core can use *mmc_set_vdd* in order to invoke
the callback function. This will be used during power cycle
where the specification requires vdd to be disabled for
1ms and enabled again.

Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---
 drivers/mmc/mmc-uclass.c | 14 ++++++++++++++
 drivers/mmc/mmc.c        | 12 +++++++++++-
 include/mmc.h            | 12 ++++++++++++
 3 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 9c07871..e1f7995 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -52,6 +52,20 @@ int mmc_set_ios(struct mmc *mmc)
        return dm_mmc_set_ios(mmc->dev);
 }
 
+int dm_mmc_set_vdd(struct udevice *dev, bool enable)
+{
+       struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+       if (!ops->set_vdd)
+               return -ENOSYS;
+       return ops->set_vdd(dev, enable);
+}
+
+int mmc_set_vdd(struct mmc *mmc, bool enable)
+{
+       return dm_mmc_set_vdd(mmc->dev, enable);
+}
+
 int dm_mmc_get_wp(struct udevice *dev)
 {
        struct dm_mmc_ops *ops = mmc_get_ops(dev);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 10af81d..d40a22b 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1194,6 +1194,16 @@ static inline int bus_width(uint cap)
 }
 
 #ifndef CONFIG_DM_MMC_OPS
+static int mmc_set_vdd(struct mmc *mmc, bool enable)
+{
+       int ret = 0;
+
+       if (mmc->cfg->ops->set_vdd)
+               ret = mmc->cfg->ops->set_vdd(mmc, enable);
+
+       return ret;
+}
+
 static int mmc_set_ios(struct mmc *mmc)
 {
        int ret = 0;
@@ -1942,7 +1952,7 @@ int mmc_start_init(struct mmc *mmc)
                return err;
 #endif
        mmc->ddr_mode = 0;
-
+       mmc_set_vdd(mmc, true);
        /* First try to set 3.3V. If it fails set to 1.8V */
        err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_330);
        if (err != 0)
diff --git a/include/mmc.h b/include/mmc.h
index 89cb26c..43d37a4 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -352,6 +352,15 @@ struct dm_mmc_ops {
        int (*set_ios)(struct udevice *dev);
 
        /**
+        * set_vdd() - Enable or Disable the Vdd line
+        *
+        * @dev:        Device to update
+        * @enable:     true or false to enable or disable Vdd respectively
+        * @return 0 if OK, -ve on error
+        */
+       int (*set_vdd)(struct udevice *dev, bool enable);
+
+       /**
         * get_cd() - See whether a card is present
         *
         * @dev:        Device to check
@@ -373,11 +382,13 @@ struct dm_mmc_ops {
 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
                    struct mmc_data *data);
 int dm_mmc_set_ios(struct udevice *dev);
+int dm_mmc_set_vdd(struct udevice *dev, bool enable);
 int dm_mmc_get_cd(struct udevice *dev);
 int dm_mmc_get_wp(struct udevice *dev);
 
 /* Transition functions for compatibility */
 int mmc_set_ios(struct mmc *mmc);
+int mmc_set_vdd(struct mmc *mmc, bool enable);
 int mmc_getcd(struct mmc *mmc);
 int mmc_getwp(struct mmc *mmc);
 
@@ -387,6 +398,7 @@ struct mmc_ops {
                        struct mmc_cmd *cmd, struct mmc_data *data);
        int (*set_ios)(struct mmc *mmc);
        int (*init)(struct mmc *mmc);
+       int (*set_vdd)(struct mmc *mmc, bool enable);
        int (*getcd)(struct mmc *mmc);
        int (*getwp)(struct mmc *mmc);
 };
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to