From: Jagan Teki <ja...@amarulasolutions.com>
mmc2 in Is.IoT using usdhc1_pads instead usdhc2_pads,
so update the same.
Cc: Stefano Babic <sba...@denx.de>
Cc: Matteo Lisi <matteo.l...@engicam.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
board/engicam/isiotmx6ul/isiotmx6ul.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c
b/board/engicam/isiotmx6ul/isiotmx6ul.c
index 008a7ae..068e2d9 100644
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
@@ -260,7 +260,7 @@ int board_mmc_init(bd_t *bis)
break;
case 1:
imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc2_pads));
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
gpio_direction_input(USDHC2_CD_GPIO);
usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
