Hello Simon,
Am 23.04.2017 um 17:35 schrieb Simon Glass:
This option is not used by any boards. Drop it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 11 -----------
drivers/i2c/fsl_i2c.c | 9 ---------
drivers/i2c/fti2c010.c | 9 ---------
include/i2c.h | 3 ---
scripts/config_whitelist.txt | 1 -
5 files changed, 33 deletions(-)
Reviewed-by: Heiko Schocher <h...@denx.de>
Applied to u-boot-i2c/next
bye,
Heiko
diff --git a/README b/README
index f75dc0f2f6..aee17cb35d 100644
--- a/README
+++ b/README
@@ -2333,17 +2333,6 @@ The following options need to be configured:
custom i2c_init_board() routine in boards/xxx/board.c
is run early in the boot sequence.
- CONFIG_SYS_I2C_BOARD_LATE_INIT
-
- An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is
- defined a custom i2c_board_late_init() routine in
- boards/xxx/board.c is run AFTER the operations in i2c_init()
- is completed. This callpoint can be used to unreset i2c bus
- using CPU i2c controller register accesses for CPUs whose i2c
- controller provide such a method. It is called at the end of
- i2c_init() to allow i2c_init operations to setup the i2c bus
- controller on the CPU (e.g. setting bus speed & slave address).
-
CONFIG_I2CFAST (PPC405GP|PPC405EP only)
This option enables configuration of bi_iic_fast[] flags
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index a1406baa87..ff3dc25927 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -284,15 +284,6 @@ static void __i2c_init(const struct fsl_i2c_base *base,
int speed, int
break;
}
-
-#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
- /* Call board specific i2c bus reset routine AFTER the bus has been
- * initialized. Use either this callpoint or i2c_init_board;
- * which is called before i2c_init operations.
- * For details about this problem see doc/I2C_Edge_Conditions.
- */
- i2c_board_late_init();
-#endif
}
static int
diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c
index b35d0d2d9c..4da959fa53 100644
--- a/drivers/i2c/fti2c010.c
+++ b/drivers/i2c/fti2c010.c
@@ -146,15 +146,6 @@ static void fti2c010_init(struct i2c_adapter *adap, int
speed, int slaveaddr)
set_i2c_bus_speed(chip, speed);
/* slave init, don't care */
-
-#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
- /* Call board specific i2c bus reset routine AFTER the bus has been
- * initialized. Use either this callpoint or i2c_init_board;
- * which is called before fti2c010_init operations.
- * For details about this problem see doc/I2C_Edge_Conditions.
- */
- i2c_board_late_init();
-#endif
}
/*
diff --git a/include/i2c.h b/include/i2c.h
index cd7f61e1c1..a88cc7cddf 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -706,9 +706,6 @@ void i2c_early_init_f(void);
#endif
void i2c_init(int speed, int slaveaddr);
void i2c_init_board(void);
-#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
-void i2c_board_late_init(void);
-#endif
#ifdef CONFIG_SYS_I2C
/*
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d18497c448..837c75f500 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4358,7 +4358,6 @@ CONFIG_SYS_I2C_BASE2
CONFIG_SYS_I2C_BASE3
CONFIG_SYS_I2C_BASE4
CONFIG_SYS_I2C_BASE5
-CONFIG_SYS_I2C_BOARD_LATE_INIT
CONFIG_SYS_I2C_BOOT_EEPROM_ADDR
CONFIG_SYS_I2C_BUSES
CONFIG_SYS_I2C_BUS_MAX
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
