Hi, Am 22.04.2017 um 14:59 schrieb Heinrich Schuchardt: > On 01/15/2017 07:52 PM, Andreas Färber wrote: >> Use the generic "distro" boot framework to enable automatic DHCP boot. >> >> The fdt and kernel addresses are adopted from downstream; ramdisk and >> scriptaddr addresses were chosen arbitrarily. >> >> Signed-off-by: Andreas Färber <afaer...@suse.de> >> --- > ... >> diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h >> index 1d5b3d5..bf7e1af 100644 >> --- a/include/configs/odroid-c2.h >> +++ b/include/configs/odroid-c2.h >> @@ -12,6 +12,8 @@ >> #define CONFIG_CONS_INDEX 0 >> #define CONFIG_BAUDRATE 115200 >> >> +#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0" > > Hello Andreas, > > do you remember why you chose to put meson-gxbb-odroidc2.dtb into > subdirectory amlogic?
I chose that directory name when I added GXBaby support to the kernel: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts Note that we had a discussion about this a while ago when I sent patches to amend the distro framework's dtb search paths, and Tom's decision was to instead hardcode the vendor dirs inside $fdtfile. > This breaks package flash-kernel in Debian. Then your package may also have problems with the Raspberry Pi 3 and further arm64 boards. For sunXi I have a pending patch to fix it. If others are not yet doing it, consider it a bug and file patches please. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
