On Friday 21 April 2017 09:38 AM, Vignesh R wrote: > Hi Franklin, > > On Thursday 20 April 2017 08:55 PM, Franklin S Cooper Jr wrote: >> This patch series converts the davinci i2c driver to use device model. >> This updated driver has been verified on both Keystone K2G and Keystone >> K2L evms by performing several i2c operations in U-boot prompt. >> >> Some additional work was required to get things working on K2G due to >> the code that reads the on board EEPROM. DM I2C sets the default address >> length to a default value of 1 when the on EEPROM requires an address >> length of 2. Therefore, an additional function and minor changes were >> required to get things working properly. >> > > You can add property: > u-boot,i2c-offset-len = <2>; > to the i2c slave DT node help to achieve this, right? > Have you tried this option? > >
I missed your reply on previous version for the above question. Sorry for the noise. -- Regards Vignesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
