There are 3 region used by rk3399 ATF: - bl31 code, locate at 0x10000; - cortex-m0 code and data, locate at 0xff8c0000; - bl31 data, locate at 0xff8c1000 ~ 0xff8c4000;
SPL_TEXT_BASE starts from 0xff8c2000, we need to reserve memory for ATF data, or else there will have memory corrupt after SPL load ATF image. More detail about cortex-M0 code in ATF: https://github.com/ARM-software/arm-trusted-firmware/commit/ 8382e17c4c6bffd15119dfce1ee4372e3c1a7890 Signed-off-by: Kever Yang <kever.y...@rock-chips.com> --- Changes in v2: - use Kconfig for the reserved memory size arch/arm/include/asm/arch-rockchip/boot0.h | 4 ++++ arch/arm/mach-rockchip/Kconfig | 8 ++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 8d7bc9a..7346876 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -16,3 +16,7 @@ .space 0x4 /* space for the 'RK33' */ #endif b reset + +#if defined(CONFIG_ROCKCHIP_RK3399) && defined(CONFIG_SPL_BUILD) + .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ +#endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index af0796d..979b48e 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -72,6 +72,14 @@ config ROCKCHIP_SPL_BACK_TO_BROM SPL will return to the boot rom, which will then load the U-Boot binary to keep going on. +config ROCKCHIP_SPL_RESERVE_IRAM + hex "Size of IRAM reserved in SPL" + default 0x4000 + help + SPL may need reserve memory for firmware load by SPL, which load + address is in IRAM and may overlay with SPL text area if not + reserved. + config ROCKCHIP_BROM_HELPER bool -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
