On Thu, Oct 29, 2009 at 03:22:24PM +0100, Joakim Tjernlund wrote: > > It seems like you don't have any relocation data as both __got2_entries and > __fixup_entries are zero. Something seems broken in general, perhaps your > linker script > is bust?
I took board/freescale/m5373evb/u-boot.lds without modifications first. After noticing that the PPC linker scripts do not have this entry (at this place), I removed "*(.fixup)" in the .text section, but this did not change anything. However, in my u-boot.map, I have some .data.rel entries which look as if they would belong into the .fixup section?! [...] .data.rel 0x00026eb4 0x30 lib_m68k/libm68k.a(board.o) 0x00026eb4 init_sequence .data.rel 0x00026ee4 0x4c common/libcommon.a(cmd_bootm.o) 0x00026ee4 boot_os .data.rel 0x00026f30 0x24 common/libcommon.a(cmd_mii.o) 0x00026f30 desc_and_len_tbl .data.rel 0x00026f54 0x88 board/astro/mcf5373l/libmcf5373l.a(fpga.o) 0x00026f88 xilinx_fns 0x00026fa8 xilinx_qspi_fns 0x00026f70 altera_fpga 0x00026f54 altera_fns 0x00026fc8 xilinx_fpga 0x00026fdc . = . 0x00026fdc __u_boot_cmd_start = . [...] (From fpga.c: [...] Xilinx_Spartan3_Slave_Serial_fns xilinx_fns = { xilinx_pre_config_fn, xilinx_pgm_fn, xilinx_clk_fn, xilinx_init_fn, xilinx_done_fn, xilinx_wr_fn, 0, xilinx_fastwr_fn }; Xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = { {Xilinx_Spartan3, slave_serial, XILINX_XC3S4000_SIZE, #if FPGA_QSPI (void *) &xilinx_qspi_fns, #else (void *) &xilinx_fns, #endif 0} }; [...] ) I did not find a special entry for .data.rel (or .data.*) in the PPC u-boot.lds either, so maybe this is something the linker should do automatically? Regards, Wolfgang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot