On 04/17/2017 12:32 AM, Ruchika Gupta wrote:
- Add SD secure boot target for ls1046ardb.
- Change the u-boot size defined by a macro for copying the main U-Boot by SPL
to also include the u-boot Secure Boot header size as header is appended to
u-boot image. So header will also be copied from SD to DDR.
- CONFIG_MAX_SPL_SIZE is limited to 90K.SPL is copied to OCRAM (128K) where 32K
are reserved for use by boot ROM and 6K for the header
- Reduce the size of CAAM driver for SPL Blobification functions and
descriptors,
that are not required at the time of SPL are disabled. Further error code
conversion to strings is disabled for SPL build.
Signed-off-by: Vinitha Pillai <vinitha.pil...@nxp.com>
Signed-off-by: Sumit Garg <sumit.g...@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gu...@nxp.com>
---
Changes in v5:
Updated MAINTAINERS file
Changes in v4:
Removed spl_board_init from board specific file.
Changes in v3:
Resend
Changes in v2:
- Rebased patches to latest dependent patch set
- With the dependent path set , spl imag size increased to 94K. So
- additionally reduce the spl image size by removing the functions from
- CAAM driver that are not required in SPL flow
Reformatted commit message to wrap back at or before 70 characters.
Please do the same on your future patches.
Applied to u-boot-fsl-qoriq master, awaiting upstream. Thanks.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
