The purpose of the patch set is to convert the board to support
the driver model and the device tree.
The patch set is based on the patch set:
1./ [PATCH v3 0/6] ARM: dts: at91: Add dts files for AT91 SoCs' boards
https://lists.denx.de/pipermail/u-boot/2017-April/287845.html
Changes in v4:
- Adjust CONFIG_ENV_OFFSET for NAND to avoid the conflict caused
by the increased binary size.
- Rebase on the master branch(ad46af0e76) of u-boot-dm git tree.
- Update the cover-letter.
- Add Reviewed-by tag
Changes in v3:
- Rebase on the master branch (22e10be45) of u-boot-dm git tree.
- Update the cover-letter.
Changes in v2:
- Add the support of Atmel uart device be used in the
board_init_f stage.
- Remove unused LED feature.
- Disable the SPL options.
- Move out [PATCH] ARM: dts: at91: Add dts files for at91sam9m10g45ek.
- Add [PATCH] board: at91sam9m10g45ek: Enable early debug UART
Wenyou Yang (3):
configs: at91sam9m10g45ek: Update to support DM/DT
board: at91sam9m10g45ek: Clean up code
board: at91sam9m10g45ek: Enable early debug UART
board/atmel/at91sam9m10g45ek/Makefile | 2 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 107 ++----------------------
configs/at91sam9m10g45ek_mmc_defconfig | 34 ++++++--
configs/at91sam9m10g45ek_nandflash_defconfig | 32 +++++--
include/configs/at91sam9m10g45ek.h | 31 +------
5 files changed, 62 insertions(+), 144 deletions(-)
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
