On 13 April 2017 at 20:16, Wenyou Yang <wenyou.y...@atmel.com> wrote: > Update the configuration files to support the device tree and driver > model. The device clock and pins configuration are handled by the > clock and the pinctrl drivers respectively. > > Because the limitation of internal SRAM size, the SPL with driver > model can't be supported, disable the SPL option. > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > --- > > Changes in v3: None > Changes in v2: > - Remain the SPI speed macros. > - Disable the SPL option for the nand config. > - Add support of Atmel uart be used in the board_init_f stage. > - Improve the commit log. > > board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 ++ > configs/at91sam9n12ek_mmc_defconfig | 19 ++++++++++++++++++- > configs/at91sam9n12ek_nandflash_defconfig | 25 ++++++++++++++++++------- > configs/at91sam9n12ek_spiflash_defconfig | 26 ++++++++++++++++++-------- > include/configs/at91sam9n12ek.h | 19 +------------------ > 5 files changed, 57 insertions(+), 34 deletions(-)
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
