0x10000000 is the start of a 2 MiB area used by the ARM Trusted Firmware (BL31).
See https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/arch/arm64/boot/dts/amlogic/meson-gx.dtsi?id=refs/tags/v4.10.10 So we should not load the ramdisk here. The legacy Ubuntu image for the Odroid C2 comes with the following line in boot.ini: setenv initrd_loadaddr "0x13000000" See http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-20160815.img.xz http://deb.odroid.in/c2/pool/main/u/u-boot/u-boot_20170226-752a100-8_arm64.deb So let's use the same address. With the patch booting Linux with booti succeeds on an Odroid C2, without the patch Linux hangs. Cc: Andreas Färber <afaer...@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de> --- v2: Title and commit message changed to reflect that this patch applies to all Meson GXBB systems. v1: Initial patch [PATCH 1/1] odroid-c2: change ramdisk_addr_r https://lists.denx.de/pipermail/u-boot/2017-April/287373.html --- include/configs/meson-gxbb-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h index 3fbfcef..66b37a6 100644 --- a/include/configs/meson-gxbb-common.h +++ b/include/configs/meson-gxbb-common.h @@ -50,7 +50,7 @@ "scriptaddr=0x1f000000\0" \ "kernel_addr_r=0x01080000\0" \ "pxefile_addr_r=0x01080000\0" \ - "ramdisk_addr_r=0x10000000\0" \ + "ramdisk_addr_r=0x13000000\0" \ MESON_FDTFILE_SETTING \ BOOTENV -- 2.1.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
