Hi Heiner,
On 04/13/2017 03:24 AM, Heiner Kallweit wrote:
> This patch set implements eMMC on Amlogic Meson GX (S905).
> It's based on Carlo Caione's work submitted here:
> http://lists.denx.de/pipermail/u-boot/2016-May/254391.html
>
> Changes to the original version:
> - BLK support added
> - fully DT-based now
> - minor general refactoring
>
> The driver was successfully tested on a Odroid C2.
>
> Note: On Odroid C2 eMMC is MMC device 1. So you have to
> switch from MMC device 0 to 1 first when testing from
> uboot prompt.
I'm not sure but i think that you can use the fixed index for eMMC.
Maybe you can refer to below commit.
commit 02ad33aa3a84821c8d9a6c4f167f143f6248b084
Refs: v2017.03-rc1-170-g02ad33a
Author: Jaehoon Chung <jh80.ch...@samsung.com>
AuthorDate: Thu Feb 2 13:41:14 2017 +0900
Commit: Jaehoon Chung <jh80.ch...@samsung.com>
CommitDate: Thu Feb 9 20:37:05 2017 +0900
mmc: mmc-uclass: use the fixed devnum with alias node
If there are alias nodes as "mmc", use the devnum as alias index
number.
This patch is for fixing a problem of Exynos4 series.
Problem is the below thing.
Current legacy mode:
EXYNOS DWMMC: 0, SAMSUNG SDHCI: 1
After using DM:
SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
Dev index is swapped.
Then u-boot can't find the kernel image..because it is already set to 0 as
mmcdev.
If change from legacy to DM, also needs to touch all exynos4 config file.
For using simply, just supporting the fixed devnum with alias node is
better than it.
Usage:
alaise {
....
mmc0 = &sdhci2; /* eMMC */
mmc1 = &sdhci1; /* SD */
...
}
Anyway, I'm testing your patches with buildman..after that, i will apply..
But this patchset was delegated to Minkyu, so i will change it. if you are ok.
Best Regards,
Jaehoon Chung
>
> Latest change in v7:
> - rebase due to other recent mmc changes
>
> Heiner Kallweit (3):
> arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version
> mmc: meson: add MMC driver for Meson GX (S905)
> odroid-c2: enable new Meson GX MMC driver in board defconfig
>
> arch/arm/dts/meson-gx.dtsi | 447 +++++++++++++++++++
> arch/arm/dts/meson-gxbb-odroidc2.dts | 147 +++++-
> arch/arm/dts/meson-gxbb.dtsi | 718
> ++++++++++++++++++------------
> arch/arm/include/asm/arch-meson/sd_emmc.h | 89 ++++
> configs/odroid-c2_defconfig | 5 +-
> drivers/mmc/Kconfig | 6 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/meson_gx_mmc.c | 291 ++++++++++++
> include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++
> include/dt-bindings/clock/gxbb-clkc.h | 34 ++
> include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++
> 11 files changed, 1594 insertions(+), 276 deletions(-)
> create mode 100644 arch/arm/dts/meson-gx.dtsi
> create mode 100644 arch/arm/include/asm/arch-meson/sd_emmc.h
> create mode 100644 drivers/mmc/meson_gx_mmc.c
> create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
> create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
> create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
